Anyone in the Edmonton area who can program baofeng radio.

[Phat Cat]

How would one program BCA channel 4.27 into my 5W Baofeng? I can get all the channels without using the sub channels but group uses

4.27. THANKS!

Your frequency will be 462.6375 and your ctcss will be 167.9. If you have a programming cable and know how to use chirp it is easier than manually programming. If you want to add it in manually do this.
-Press the vfo/mr button to get to frequency mode
-enter 462.6375
-Hit menu
-Up or down arrow until you reach T-CTCS
- press menu
-up arrow until you get to 167.9
- press menu then exit.
If you want to save this channel
-Press menu
-up arrow until you reach MEM-CH
-press menu
- up or down arrow until you reach the channel you want to save it in ( 1-127)
- press menu and then exit.

 

[toyman2k]

I have a UV-6 model so don't have any menu options just on / off and channel selector. Is the only way to do it with a cord then?

Thanks for your response PHAT CAT !!

 

[thegeneral]

Ross Brochu in leduc sells and programs them. I saw his ad on a buy/sell group on crackbook. If you have access to a radio that is already programmed you can just clone it. You will need the cable mentioned earlier to do it.

 

[toyman2k]

No radio to clone. I'm the 1st in the group to try on the Baofeng.

 

[AreWeThereYet]

Ross Brochu in leduc sells and programs them. I saw his ad on a buy/sell group on crackbook. If you have access to a radio that is already programmed you can just clone it. You will need the cable mentioned earlier to do it.

This guys has a hard time returning any info,.. I want to buy 3 radios so I am going to look elsewhere.