Any Heavy Equipment Operators Here?

gates559

Active VIP Member
Joined
May 31, 2013
Messages
750
Reaction score
900
Location
G.P Alberta
Buy once, dont try to cheap out, Its a pita to fill up every day. At the end of the day I like to go home, the faster it fills the better. big hose and nozzle as well.
What do you do now, I think pipeline is where its at as far as $$$$ goes.
 

byronkentgraham

Active VIP Member
Joined
May 31, 2010
Messages
3,211
Reaction score
2,275
Location
Rainier, Alberta
Buy once, dont try to cheap out, Its a pita to fill up every day. At the end of the day I like to go home, the faster it fills the better. big hose and nozzle as well.
What do you do now, I think pipeline is where its at as far as $$$$ goes.

Work in the family feedlot. Only reason I'm going pipelining is to make enough money to buy my own quarter and a house.
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,264
Location
Grande Prairie
Check with the contractor on what they require. Most that are paying for a service truck require 400 L minimum as well as fire extinguisher ,first aid kit, spill kit and two way radio and possibly grease gun and so on.
Some may even ask for required insurance to work through them.
 

lloydguy

Active VIP Member
Joined
Nov 29, 2010
Messages
889
Reaction score
1,499
Location
Lloydminster
Sorry for being off topic, but as per someones earlier comments about clear fuel.
What company wouldn't run dyed fuel in off road machines?
That makes no sense
 

boydo

Active VIP Member
Joined
Jun 3, 2009
Messages
446
Reaction score
205
Location
sherwood park
after 90 gallons dont you have to run placards on all sides legally? get a 15-20 gpm pump and get a 16-20 foot hose, then you dont have to be six inches away from the machine to fuel. also mount your pump on drivers side then when you look out the back window your not looking at it, you dont shoulder check or back up looking over your left shoulder! i have a 15 but faster is always better! hope that helps out! also get arctic grade hose otherwise it will be like a 2x4
 

boydo

Active VIP Member
Joined
Jun 3, 2009
Messages
446
Reaction score
205
Location
sherwood park
Sorry for being off topic, but as per someones earlier comments about clear fuel.
What company wouldn't run dyed fuel in off road machines?
That makes no sense

i think in saskabush they dont run dyed fuel? not 100% on that....
 

byronkentgraham

Active VIP Member
Joined
May 31, 2010
Messages
3,211
Reaction score
2,275
Location
Rainier, Alberta
For a regular rectangular 110 gallon tank with 15 GPM arctic GPI pump, whole tank armour guarded, mounted and wired to a toggle switch in the cab I'm looking at $1,500 seems reasonable doesn't it?
 

powder junkie

Active VIP Member
Joined
Nov 18, 2008
Messages
787
Reaction score
527
Location
redwater, alberta, canada
after 90 gallons dont you have to run placards on all sides legally? get a 15-20 gpm pump and get a 16-20 foot hose, then you dont have to be six inches away from the machine to fuel. also mount your pump on drivers side then when you look out the back window your not looking at it, you dont shoulder check or back up looking over your left shoulder! i have a 15 but faster is always better! hope that helps out! also get arctic grade hose otherwise it will be like a 2x4


Interesting and true point but i like pump on passenger side so when its time to fill slip tank, u pull up and truck spout and tank spout r on same side at the cardlock or wherever. Also if u gotta back in close to hoe to fill up (wit shorter hose), u arent stuck tryn to open drivers door against hoe. 6 of one, half dozen of another
 

mallard d69

Active VIP Member
Joined
Jan 23, 2009
Messages
1,400
Reaction score
168
Location
spruce grove
Sorry for being off topic, but as per someones earlier comments about clear fuel.
What company wouldn't run dyed fuel in off road machines?
That makes no sense

i know most bush and pipeline sites dont use brand new equipment but some do. All the 2013 model komatsu's REQUIRE at least clear diesel and manufacter wants ultra low sulfar to run at its best. if you run a new komatsu hoe/loader/dozer/rock truck with dyed fuel they throw all kinds of service lights / codes. If you run them long enough on dyed they will go into limp mode and wont go higher then a sertant rpm level
 

Joholio

Active VIP Member
Joined
Nov 20, 2012
Messages
35,161
Reaction score
29,699
Location
Hespero/Sicamous
Interesting and true point but i like pump on passenger side so when its time to fill slip tank, u pull up and truck spout and tank spout r on same side at the cardlock or wherever. Also if u gotta back in close to hoe to fill up (wit shorter hose), u arent stuck tryn to open drivers door against hoe. 6 of one, half dozen of another

Copy that
 

Joholio

Active VIP Member
Joined
Nov 20, 2012
Messages
35,161
Reaction score
29,699
Location
Hespero/Sicamous
Its the same diesel fuel, it just has dye in it. Unless the dye makes codes??? Dunno
 

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
29,395
Reaction score
48,073
Location
GBCA
Yep,I like pump on swamper's side.Also use electric pump for fueling pickup while slip tank is filling.
Interesting and true point but i like pump on passenger side so when its time to fill slip tank, u pull up and truck spout and tank spout r on same side at the cardlock or wherever. Also if u gotta back in close to hoe to fill up (wit shorter hose), u arent stuck tryn to open drivers door against hoe. 6 of one, half dozen of another
 

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
29,395
Reaction score
48,073
Location
GBCA
i know most bush and pipeline sites dont use brand new equipment but some do. All the 2013 model komatsu's REQUIRE at least clear diesel and manufacter wants ultra low sulfar to run at its best. if you run a new komatsu hoe/loader/dozer/rock truck with dyed fuel they throw all kinds of service lights / codes. If you run them long enough on dyed they will go into limp mode and wont go higher then a sertant rpm level

Its the same diesel fuel, it just has dye in it. Unless the dye makes codes??? Dunno
Ya exact same fuel with some food coloring in it.
 

Syclone74

Active VIP Member
Joined
Feb 9, 2013
Messages
217
Reaction score
350
Location
Blind Bay B.C
i know most bush and pipeline sites dont use brand new equipment but some do. All the 2013 model komatsu's REQUIRE at least clear diesel and manufacter wants ultra low sulfar to run at its best. if you run a new komatsu hoe/loader/dozer/rock truck with dyed fuel they throw all kinds of service lights / codes. If you run them long enough on dyed they will go into limp mode and wont go higher then a sertant rpm level

Just left a pipeline company that runs a full Komatsu fleet. 20 brand new hoes bought this year and a couple dozers. We ran nothing but dyed in them with no issues. Just can't let them idle for to long then they go into limp mode.
 

Pinner

Active VIP Member
Joined
Jan 14, 2009
Messages
668
Reaction score
774
Location
B.C.
i know most bush and pipeline sites dont use brand new equipment but some do. All the 2013 model komatsu's REQUIRE at least clear diesel and manufacter wants ultra low sulfar to run at its best. if you run a new komatsu hoe/loader/dozer/rock truck with dyed fuel they throw all kinds of service lights / codes. If you run them long enough on dyed they will go into limp mode and wont go higher then a sertant rpm level

It's the same fuel... a couple liters of dye per truck load is the only difference. All fuel is ULS now.
 

freeflorider

Active VIP Member
Joined
Dec 17, 2011
Messages
2,804
Reaction score
8,758
Location
West koots
News to me about the equipment shutting down over dyed fuel...2 2014 cat 535s 2 2013 2154 and a cat 324 fm all running on dyed with no problems here.
about the tank go big, never know when you will be adding fuel into two hoes or filling a double shift. Also ask if you need to have a double wall tank?
As mentioned it gets cold so a fast pump is the answer. In Alberta you can't be afraid to spend $$$ they pay you well for that so don't be the operator that can hold up his end of the bargin.
 
Last edited:
Top Bottom