Any body got boondocker box settings for a 2005 m7

[cnelson6]

Im just looking for some starting point settings for my 2005 m7 its got a mbrp can v force reeds and a high flow intake tube. Im just looking to get rid of the mid range bog. I ride from 3000 and up mostly around golden. Any suggestions or help would be great. Also do these sleds run hot on the belts without venting?

 

[moyiesledhead]

All M's run hot on the belt without venting. Gotta get some air in there.

Sorry, can't help with the numbers. Mine has a Bikeman head and 1.5 degrees of timing so they won't do you any good.

 

[Slamnek]

i would get an EGT or Air/fuel guage for tuning. I was having a terrible time with mine untill i put an new A/F probe in and now tuning with my BD box is easy. When i first got this sled it had koso dual egt's and a air/fuel guage. since then i took the egt's off because as long as the air/fuel numbers were good, the egt numbers were good. I didn't want 2 different guages to watch. I also found that when playing with the BD box to only do 1 RMP range at a time and move the numbers in increments of 3. I hope this helps.

 

[cnelson6]

Thanks for the replies guys. Slamnek im just wondering what numbers on the af gauge are you looking for? and where on the pipe do you need it to run and read the correct reading?

 

[Slamnek]

It does'nt matter where the probe goes, mine is on the can. I was told by Brent Linderman to run between 10.8 and 11.8. He said 12.7 max on a long wot pull. My sled has the RKT head and base gasket and a D&D intake and up at elevation (3000-7000) i run the BD box on all zero's except the 7800-8100 area i added a little fuel to the low mid and hi range because I was getting 13.0-13.5 on the A/F guage. When i ride at home (1850-2000) i only had to add a bit of fuel in the mid range (5000 rpm) and i left the numbers in on the top end from what i had in the mountians and it sits between 10.8-12.5. i don't have any bogs at all.

 

[cnelson6]

Thanks a bunch man! This will be super helpful on my set up! Thanks again for all the help! This may not be my last question though..... haha this should clear up all the set up for me now though!

 

[Slamnek]

No problem man, thats why this forum is so great.