Aluminum checker plate polish

rider1

Active member
Joined
May 21, 2012
Messages
94
Reaction score
36
Location
ab
I use Lous 222 it works awesome. Manufactured in Calgary.
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
Polishing that will get tired real fast. Road grime is a big problem in the winter. I was a slave to my deck. Best thing I did was sand blast and applied LineX.
Im sure that will come but not for a few years yet
 

teeroy

Active VIP Member
Joined
Oct 7, 2007
Messages
9,150
Reaction score
14,432
Location
Roma, Alberta
I was talking to my boss thins morning and he had a good point about the powerball and I think he might be right about it. He said the checker plate will chew up the ball because the edges are sharp.
powerball and Mother's is what I use on the checkplate trim on my toyhauler. it hasn't chewed up my powerball yet. your mileage may vary
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
powerball and Mother's is what I use on the checkplate trim on my toyhauler. it hasn't chewed up my powerball yet. your mileage may vary
You know I was out there last night and had another look. This checker plate is the cheap stuff. The edges are not sharp like the stuff I used to install. The powerpall might work just fine.
 

teeroy

Active VIP Member
Joined
Oct 7, 2007
Messages
9,150
Reaction score
14,432
Location
Roma, Alberta
You know I was out there last night and had another look. This checker plate is the cheap stuff. The edges are not sharp like the stuff I used to install. The powerpall might work just fine.
the stuff on mine isn't sharp at all, it's pretty thin material. the thicker plate is a lot more aggressive for sure
 
Top Bottom