96" Summit Mods

[KORE]

Just thought id throw some pics of my summer projects out. See what you all think. First i stretched the uncles 97 MXZ from 121" to 151" with some taller bars. Then at the end of last season i sent my sled for a good tumble in Clemina and wrecked the stearing, so since i had to pull it a part i thought i woul big bore and get some mods done. If it comes together she'll be a whole new sled. Probably should of bought a whole new sled but its the journey that we learn from, right!!

 

[KORE]

1)The first is the mxz
2) How it looked at the end of the season
3)the new footboard work im doing
4)the lightweight skidplate i made
5)her new stance
6)17" shock towers hope i can get a pipe in there!
7) as it is right now witht the new bar setup waiting for the motor and some welding:d

 

[SLEDBUNNYRACING]

Very Nice Kore, post a couple of larger photos of the MXZ...looks very nice.

 

[KORE]

Thanks, ive got all these pics in my album if you want to have a better look. The MXZ has a 16" track stuffed in it and i cut the paddles down to 1 3/4"

 

[99summitx]

hey Kore the running boards look great, where did you get them and how much work to get them to fit on the s-chassis.

 

[KORE]

The running boards are stock but ive inserted eliminators for a cat. what i am doing is: I first mark the location of the inserts then scribed along the grip riveted to the rolled edge. this is where i cut, from the start of the eliminator to the end of the board. i then pryed it open to fit the insert and riveted together of course cutting out the holes for snow removal. Next i'll be welding the rolled edge to the tunnel with some type of gussets and stitching alot of the original board to the insert, we'll see how this goes.:d

 

[99summitx]

The running boards are stock but ive inserted eliminators for a cat. what i am doing is: I first mark the location of the inserts then scribed along the grip riveted to the rolled edge. this is where i cut, from the start of the eliminator to the end of the board. i then pryed it open to fit the insert and riveted together of course cutting out the holes for snow removal. Next i'll be welding the rolled edge to the tunnel with some type of gussets and stitching alot of the original board to the insert, we'll see how this goes.:d

I'm very interested how it turns out, Make sure you take some pics.

 

[sledobsessed]

looks good...i to am long tracking my sled

 

[jay007]

Yes... please post more pics of the running boards when you get them done, I want to something like that to my 97 sumit.