860 p tek carb an clutch tuning

[treeboy]

Well I did it an got a new 860 linderman for my xp, fully ported, 13.5 shaved head.
Before and still are set up my carbs have 500 mains, stock pilots, 40 thou shims on the needles, and the fuel screws 1.5 turns out. Rage cage reeds. Belt drive 2.52 gearing, also my clutching and a 13.5 stock shaved head. The sled has ripped for many miles with the stock bore.
Just wondering how some others have the carbs set up for the 860, and my clutching I think I may just need to up the secondary spring.
Any input would be wicked.

 

[oler1234]

My old ride with twin pipes
560 jet
30 thou shims
2mm oversize roller plus small set screw
160/360 spring
shockwave in rear with stock spring
19/49 gearing

another ride with single was
520 jet
30 thou shims
stock rollers
130/260 spring
shock wave with stock sprng
19/49 gearing

 

[rusty]

does the fella who built it have a recommendation

 

[slededjr]

Phone Brent and run what he tells you. You won't be disappointed. He knows his stuff.

 

[treeboy]

Will be asking Brent too when he gets back from Vegas, just like too see what others are running too.

 

[neilsleder]

Give Deano at mad Motorsports a call. He works with Brent lots and will set you up!


Sent from my iPhone using Tapatalk