29.5 outlaws on a outlander and brute 750

[cookgio]

in order to put 29.5 outlaws on a outlander 800 and brute 750 do you need a lift
does any body know where u can get a outlaw clutch kit does rec tech sell them.

 

[ChinRat]

in order to put 29.5 outlaws on a outlander 800 and brute 750 do you need a lift

I can only speak for the Outy, they will fit and look great....BUT with the suspension travel you WILL get rub and trimming might not give that warm fuzzy feeling. I lifted my 08 800 outy and run 29.5 outlaws no rub. But a word of caution....your C/V joints and axles will take a beating. i ended up going to the Gorilla Axles.

 

[cookgio]

I can only speak for the Outy, they will fit and look great....BUT with the suspension travel you WILL get rub and trimming might not give that warm fuzzy feeling. I lifted my 08 800 outy and run 29.5 outlaws no rub. But a word of caution....your C/V joints and axles will take a beating. i ended up going to the Gorilla Axles.

how big a lift did you put in your outy and did you snap your axles from hard riding or was it because of the lift.

 

[ChinRat]

how big a lift did you put in your outy and did you snap your axles from hard riding or was it because of the lift.

The axles went a couple times, heavy mud and hilly terrain, They went cuz of hard riding, not abusive, just hard.....lets be honest, with 29.5's your going in the mud.....waste of $$ to wear out those 29.5's on dry flat ground. I used the Highlifter 2" on the outy.
High Lifter - The Leader In Custom After-Market ATV Accessories

Ive had couple buddys that went with the RubberDown lift...they seem happy
rubberdown customs - atv lift kits for Can Am Outlander and Renegade X , Do it your self installation instructions, front and back kits

 

[Wildreaper]

I have 29.5 Laws on my renegade and have not had axle problems. But if you over camber the front wheels expect to blow axles no matter what type.

 

[4byrookie]

You could run the 29.5 laws on a Brute 750 if you are very light and have the suspension cranked right up but you would still have to do some very small trimming on the floorboards. I have a 1.5" lift on mine and also have the Highlifter springs and the only time it rubs is when I go over jumps(this is due to having 1 spring with 5000km+ and the other 3 just over 1300km) I have run my Laws for approx. 400km or so and have had no issues with the rest of the drivetrain, except for the belt(my own fault) but I already have upgraded tierods and ends.

 

[Canadianking]

I run 29.5 outlaws on my outy and recently installed the gen1 lift from rubberdowncustoms and it helped a lot on keeping the front tires from rubbing.