2018 Mountain Cat Riser Height?

[skegpro]

What are you running for a riser height?
How tall are you?

 

[Jooohan87]

2” riser, 5’9 (180cm)

 

[skegpro]

2” riser, 5’9 (180cm)

Sorry tap talk is speaking giberish to me.

So your running at 2 inch riser and your happy with it?

I am torn between the 2 inch and 3.5 inch.
If CAT made a 3 inch I'd probably go with that.

 

[canuck5]

What's mine at skegpro? I know the riser is 8" I'm guessing 10"?

 

[skegpro]

What's mine at skegpro? I know the riser is 8" I'm guessing 10"?

I'll have to go measure.

 

[tmo1620]

I went with a 3” cfr riser and turcotte bars, about 5” total, im 170cm tall

 

[skegpro]

I went with a 3” cfr riser and turcotte bars, about 5” total, im 170cm tall

So you went 1/2" taller than stock......

 

[tmo1620]

Yes i had the 3” cfr riser from a previous proclimb so i used it, i may go to a 2” rise as it seems a little taller on the 18 vs proclimb, riding this week so ill see if its to tall

 

[Eldereldo]

Stock, whatever that is. 6ft tall, seems to be a bit shorter the the 2014 adjustable post was at its tallest setting, might go 1” longer after I have more of a chance to ride it.

 

[Arctic 1000]

Im running a 6" CFR with boondocker bars, I think the bend in the bars gives me an extra inch or so, im 6'5" also id recommend for the bigger guys pouring your post full of fiberglass resin, the new posts are a bit stronger than the old adjustables but its not worth it to me to loose a day over a broken post, just drill a 1/2" hole and use a small funnel.