2017 Ski Doo 850 Silber Question

[kxfrider]

I had a silber kit installed on my 850 and with the new helix that cam with the kit from silber.I don't have anymore threads left to adjust my belt lower for proper belt deflection. It sits a little to high but I cant adjust anymore. Any ideas thanks

 

[pfi572]

The adjuster is installed all the way into the helix center ?
Sounds like it’s not as you tighten to drop belt deflection .

 

[kxfrider]

Yes adjuster is all the way in. No more threads left to adjust in to drop belt to where it needs to be.

 

[MK4TDI]

Yes adjuster is all the way in. No more threads left to adjust in to drop belt to where it needs to be.

Do you have the belt deflection collar on correctly? I believe the threads are offset to the outside of the shaft. There should be 1/4" ish of that collar that doesnt have threads on it, and that side of the collar goes to the inside.

 

[kxfrider]

I will take a look I didn’t think to look at the collar thank you!