2016 m8000 camber problem?

sketch96

Active VIP Member
Joined
Dec 30, 2009
Messages
242
Reaction score
128
Location
prince george
My right side has way more negative camber than the left side. Nothing has been hit. No Mark's on anything. 2016 m8000. Bought it with 70 miles on it. Very visible looking at it. Checked it with a small level and its significantly more than the almost level left side.
Anyone have this issue?
 

Lund

Active VIP Member
Joined
May 4, 2013
Messages
4,246
Reaction score
11,290
Location
Vernon/Kelowna
My right side has way more negative camber than the left side. Nothing has been hit. No Mark's on anything. 2016 m8000. Bought it with 70 miles on it. Very visible looking at it. Checked it with a small level and its significantly more than the almost level left side.
Anyone have this issue?

Get the sled off the ground and check the upper A-arm mounting blocks to the chassis. They have been known to come loose and apart. This will cause your camber to fall out.
 

Allseasons

Active VIP Member
Joined
Jan 21, 2014
Messages
506
Reaction score
1,058
Location
Rocky
I ghost rode mine lightly into a stump. No visible damage at all. Camber was way out. Turns out I bent and cracked 3 upper frame supports, and everything was shifted all the way back to the struts that hold the fuel tank on.

Do some inspections. Those aluminum supports are cheap, and easy to replace.
 

Allseasons

Active VIP Member
Joined
Jan 21, 2014
Messages
506
Reaction score
1,058
Location
Rocky
F3E7472D-6CDE-40F7-82E3-6375DED7369B.jpg
 
Top Bottom