2015 xm 174 T3 800 stator output need help pls

[kingcat162]

Just wondering how I find out how many watts my stator is good for. I'm wondering because I've got an electric water pump and oil pump for the turbo - I put Led headlights in it - but I'm wanting to put a blowhole kit in it and I'm just worried that my stator will melt - also wondering if I have everything running - hand warmers on max, blowhole, water and oil pump, headlights and glovebox heater will it cook the stator or is their a fail safe if you overload it like a fuse or something?

 

[AaronQ]

Glovebox heater. What is his voodoo magic you speak of....

 

[kingcat162]

Glovebox heater. What is his voodoo magic you speak of....

U know - the doo glovebox heated liner

 

[AaronQ]

Do they work alright?

 

[kingcat162]

Do they work alright?

I love it - it defoggs my goggles in 15 mins - it comes with the rca plug in - easy to install - then I added the high rise glove box extension so it fits 2 pairs of goggles

 

[AaronQ]

Ya I have the glove box extension on mine and the gps mount for the brp Garmin handheld that came with dad's side by side it's fricken handy.
Does yours seal fairly well mine gets a bit of snow in it sometimes.

 

[kingcat162]

Ya I have the glove box extension on mine and the gps mount for the brp Garmin handheld that came with dad's side by side it's fricken handy.
Does yours seal fairly well mine gets a bit of snow in it sometimes.

I put a piece of 1/2" think foam stripping like for a patio door along the bottom of it and gorilla glued it on there - bam - sealed lol

 

[kingcat162]

ANYONE OUT THERE - does anyone know how many watts the 2015 etech 800 stator is good for? I've had such bad luck with crappy dealerships being clueless don't know who to call or how to find this info - pls help someone anyone ???????

 

[AaronQ]

ANYONE OUT THERE - does anyone know how many watts the 2015 etech 800 stator is good for? I've had such bad luck with crappy dealerships being clueless don't know who to call or how to find this info - pls help someone anyone ???????

No idea. But I do know that if you seal your glovebox up with gorilla foam and tape and put the heater in there it'll dry your goggles off...lol sorry I couldn't resist.
Find a 12v power source and get a amp clamp multimeter and see how much draw is coming through the stator with everything on

 

[kovs]

I want to say they are 360watt think they upgraded them to that when etec came along I could be wrong tho

 

[tex78]

I also seem to recall the 360 Watt

I google searched but didn't really find sh!t

 

[BeachSled]

This is from a 2014 service manual, so i would hope the '15s are the same. Hope this is what your looking for.

 

[kingcat162]

This is from a 2014 service manual, so i would hope the '15s are the same. Hope this is what your looking for.

so does that mean that it will put out a max of 1340 watts @ 6000rpm before something gets nuked - i wonder if it would just blow the 25 amp main fuse or if it would destroy the stator?

 

[SUMMIT TREE]

Ok reading my manual which I just picked up and is the most current as far as I know. To give you the jist of how I understand it is this
Th ECM Has total control of the stator and priority is to maintain 60VDC to operate crucial operating systems ie: the ignition
Below 2000 Rpm current is limited to be able to maintain that 60vdc as stator output is Rpm dependent
Above 2000 Rpm it has a maximum of 25A avilable again in an attempt to keep the vital 60Vdc

so in answer to your question I would say no, you wont melt down your stator, but all you have is a max of 25 amps total. At worst you might pop your 25A main fuse. Which looking at this basic schematic they give kinda looks like it just wont charge the battery if that pops. Hope that helps.

 

[ferniesnow]

ANYONE OUT THERE - does anyone know how many watts the 2015 etech 800 stator is good for? I've had such bad luck with crappy dealerships being clueless don't know who to call or how to find this info - pls help someone anyone ???????

I have a lot of respect for Jason Williams (service manager) at Bow Ridge in Cochrane. They are quite busy this time of year but give him a call and ask him the question: 403-932-2019