2015 Summit X T3 S Module buckled

[gitrdone]

I took a hard hit to the left ski last weekend and ended up buckling my S module. My question is a good friend of mine is parting out a 2009 Summit XP 50th anniversary with a straight front end. I’m wondering if it will fit my sled. Thanks for any help.

 

[pfi572]

Yes it will .

 

[gitrdone]

Yes it will .

Perfect. Thanks for your help.

 

[Catman10]

Maybe the S module is the same but nothing else on that front end is, a arms, spindles etc,just check out my t3 build here and you will see, I believe 15 and up t3 only parts for your sled, good luck.

 

[Bnorth]

S-mod is the same but 08/09 were weaker than 2010+ so make damn sure it is straight before you put it on and then if you do, brace it. Those early sleds bent if you looked at them wrong.

 

[pfi572]

S-mod is the same but 08/09 were weaker than 2010+ so make damn sure it is straight before you put it on and then if you do, brace it. Those early sleds bent if you looked at them wrong.

Yes and if I remember right the freeride has some extra strength as well and bolts right in.

 

[captain extreme]

I have replaced around 8 of them, and always suggest replacing with the freeride one.
If anyone is looking for someone to change one out PM me....

 

[Bnorth]

Yes and if I remember right the freeride has some extra strength as well and bolts right in.

Freeride is braced a bit more and actually cheaper than the summit module. 600RS has even more bracing but is a bit more money.

 

[gitrdone]

Thanks for all the help. Turns out the s mod was tweaked so now I’m on the look out for one. I’ll check out for a freeride rather.