2015 F350 srw max tire size

[g123]

Is anybody running 35/12.5R20 on their F350 srw? Just wondering if they will rub being a bit taller and an inch or so wider. If so, any pics would be great. Thanks

 

[Superduty 11]

I have a levelling kit in my truck and run those size of tires with no issues at all. You do need to have at a minumum a levelling kit for the 35" not to rub.

 

[OnlyPolaris]

dad runs that size on his with a 2.5" level kit and -12 offset wheels. They rub the mudflaps a little at full turn.

 

[Summitric]

Done many with the front end level kit... Your good to go.... Like previously said, depending on wheel offset, watch mudflap clearance


Sent from my iPad using Tapatalk

 

[Quattroman]

I have 35/12.50/20's trail graps on my 2014 F350 Platinum, they are on the stock 20" rims, no level and no rubbing

 

[mxracer78]

I ran 37x12.5x20 dune grapplers on my 2006 f350 srw. The front only has a ready lift 2.5" leveling kit. No issues rubbing at all.

Currently running 35's (pictured) with more aggressive lugs, also slightly wider, and no issues either


Sent from my iPhone using Tapatalk

 

[jaredszakacs]

35's all day long with a levelling kit. depending on rim offset you can run 35's stock height

 

[g123]

Thanks for all the replies. Im thinking I'll just keep the stock rims and put on the Readylift PT#69-2531. It's a 3.5"/1"R kit. I just don't want the 35's to look too small.

 

[tex78]

I ran 37x12.5x20 dune grapplers on my 2006 f350 srw. The front only has a ready lift 2.5" leveling kit. No issues rubbing at all.

Currently running 35's (pictured) with more aggressive lugs, also slightly wider, and no issues either


Sent from my iPhone using Tapatalk

Ummmmmm , that's a 07 and older truck


Post is for a 2015, and bumper, fender ect is totally different than ur older body

If they guy put the tires on and they rubbed like crazy, and u were the only one to post saying it's good to go, would kind of perturb the poster off eh


Mabe match ur info with what's asked, just saying

 

[Oilboy]

TEX the same fender shape and opening since 99 ran 35's on my 7.3-6.4-6.7, without a little offset they will rub a bit at stock height. with a level you should be good with stock rims,
might need to go to smaller mud flaps, i did on my 2010 and after that no issues

 

[tex78]

B.s, look at the above two pics, the red 07 and older and white 11 and newer, way different flair, opening, bumper, air dam

 

[Oilboy]

whats the saying about arguing with a idiot... ya ill leave this alone, OP youll be fine with 35's on stock with a 2"+ level kit or with offset rims and smaller mud flaps

 

[tstams]

I ran the fuel rims with the -18 offset with 35 toyo mts with the offset mudflaps with no leveling fit and no rubbing

 

[77Crash77]

I have run an 06,08,and 13. All a 2.5 level kit. All 35" tire on stock rim. No issues.


Sent from my iPhone using Tapatalk

 

[C of Red]

I have a 2013 Super Duty (pics in my garage). Stock rims with Toyo MT 35's. Running a Ready Lift 2.5" level kit. When I turn hard left the the drivers side tire rubs the frame a little. Not running mud flaps.

 

[neilsleder]

B.s, look at the above two pics, the red 07 and older and white 11 and newer, way different flair, opening, bumper, air dam

Not to mention different front ends/suspension set up. Not sure if the turning radius is different.

 

[tex78]

Not to mention different front ends/suspension set up. Not sure if the turning radius is different.

Oh but the above guys say it is so......




Plus the op, never said anything about a lift to clear, just asked if the would the way it is

 

[g123]

I ended up putting 35x12.5 Toyo MT on the stock platinum rims. Had to put the 2.5" leveling kit on the font with step back flaps to achieve zero rub. Thanks for all the replies.