2014 change to 2016 A arms

[TROLLCAT]

Can I use my lower 14 A arms and 16 spindles and order upper A arms and make this work

2014 proclimb 38"

is there a 2016 style front end with a 38" stance ?

 

[CatMan16]

Can I use my lower 14 A arms and 16 spindles and order upper A arms and make this work

2014 proclimb 38"

is there a 2016 style front end with a 38" stance ?

Did a bit of searching and it looks like there were kits for 38" wide that included spindles and upper a-arms. I would assume you would use original lower a-arms. Not sure if you can get just the a-arms though.

 

[TROLLCAT]

did some more digging here me thinks High Country XF A arms are 38" wide

 

[jrusher]

I used the 16 spindles and z broz upper 38" a arms and kept the stock lower A arms to narrow my 15 viper up to 38" . I should of went with the 36" cat kit as i want to go narrower now

 

[TROLLCAT]

I tried and mocked up the 16 spindles and 38" a-arm (16)

kept the 14 lower a-arm and shocks

could not get ski mounting bolt level in the straight position

the ski mounting bolt is going to be a inch lower than stock

was going to ride today so put all the 14 stuff back on