2013 pro 800 rmk wouldn't start

zeke800

Active member
Joined
Nov 9, 2010
Messages
32
Reaction score
13
Location
Canora
Drove 16 miles shut the sled of for 5 minutes went to start it and won't start . Left it for 35 minutes and started 2 pulls . Need help to figure this out
 

kyle019

Active VIP Member
Joined
Dec 20, 2010
Messages
242
Reaction score
209
Location
Vermilion, AB
Your obviously still on your mixed break in tank? Sounds like it over fueled/ran rich and it basically flooded itself. put new plugs in and ride it like to stole it
 

Shredder

Active VIP Member
Joined
Dec 4, 2006
Messages
2,632
Reaction score
2,925
Location
Grande Cache AB
I know some idiot will say the driveshaft broke.

Driveshaft safety switch???:p Just kidding; I love the ProRMK and will likely own one within the next year or two. Likely will never happen again after you get the first tank thru it, and throw a new set of plugs at it.
:beer:
 

Redneck002

Active member
Joined
Nov 8, 2009
Messages
26
Reaction score
11
Location
Kindersley Sask
I would be curious to see if any body else has had this problem a guy at Quratz creek had the same thing happen could not get his going there was no spark at all.
 

Little M1

New member
Joined
Nov 21, 2012
Messages
2
Reaction score
0
Location
Nelson BC
They will flood sticky injector and with added oil in the tank this does happen from time to time.
 
Last edited:
Top Bottom