2013 Grizzly roll over and won't start

[Adam31]

Looking for a little help! Have 2013 grizzly 700 that was rolled now there is no power to display panel and won't turn over. There is power though as the lights and winch both work. Anyone have this problem before? I found some thing about lean sensor but don't know where it is located. Anyone help would be appreciated. Thanks

 

[AreWeThereYet]

I would start with checking all your fuses

 

[whoDEANie]

If there's no power to the display, you have an issue, likely a fuse, broken wire, or loose connection. Even if the display was somehow roasted, there's a good chance the machine would still fire up.

 

[Adam31]

Was just the ignition fuse which is also for the display. Thanks for the help

 

[whoDEANie]

Was just the ignition fuse which is also for the display. Thanks for the help

Glad to hear you got it figured out.