2013 Arctic Cat 1100 turbo riser height

[snowho]

Use to ride 09 M8 with telescoping bars. loved them at max height. Does anyone know maximum handle bar riser height for 2013/ 1100 without changing throttle or brake cables. Also, does it effect stock travel cover?

Thanks!!!

 

[sled_wrangler]

been wondering the same for my 14 …. the shortest block that ase in sherwood park sells is a 2.5" if i remember correct but im thinking that i would have to change break lines and extend throttle …. Im getting a bunch of work done on mine right now at mad motor sports im going to call him and ask him right now

Use to ride 09 M8 with telescoping bars. loved them at max height. Does anyone know maximum handle bar riser height for 2013/ 1100 without changing throttle or brake cables. Also, does it effect stock travel cover?

Thanks!!!

 

[sled_wrangler]

Just talked to deano and he has mine opened up and look and figures at most a 4" block before you have to extend everything wires included ... I believe the stock block is a 2" so you could only go 2" more above that

Sent from my SGH-I337M using Tapatalk

 

[snowho]

Just talked to deano and he has mine opened up and look and figures at most a 4" block before you have to extend everything wires included ... I believe the stock block is a 2" so you could only go 2" more above that

Sent from my SGH-I337M using Tapatalk

Talked to Ralphs Arctic Cat here in Calgary. Sounds like the word around the campfire is max 4" with only a 2" gain. They say it would still be slightly lower then my old telescoping set up. Has anyone put this on & had issues with stock travel cover?

Thanks!

 

[ZRrrr]

I run the Cat 8.5" riser with no cable or cover issues.

 

[snowho]

Thanks for your input ZRrrr, i take it it's on a 2013 1100? thats good news because i was hoping to go bigger. Not sure why everyone i've talked to says you can't go bigger than a 4" - 41/2" block. Thanks again.

 

[Chump]

I got the zbros adjustable delete kit and a 5" riser. Cut about 2" off my steering post and am quite happy with how it feels. I could try and get pics

 

[cookgio]

On the m1100 turbo 2013 the biggest riser you can put on with out changing cables I's 3' I just did it to mine all u have to do is cut the zap straps and pull extra cable up.

Sent from my SGH-I747M using Tapatalk

 

[cookgio]

I run the Cat 8.5" riser with no cable or cover issues.

What size cable extensions did u need?

Sent from my SGH-I747M using Tapatalk

 

[snowho]

So with the 3", did you remove the stock 2" & only gain a 1"?