2012 pro engine codes????????????

[RINGER]

what is code 173 ?

it shows 173
3

any help would be appreciated

Ringer

 

[timbo]

Exhaust Temp Sensor=173
Voltage to high=3
Change out the pipe sensor.

 

[WesG]

Nailed it. Also after you change the sensor it has to warm up before it will clear the code. Common failure i have gone through one per season like clockwork.

 

[RINGER]

thanks timbo

will the pipe sensor set the voltage too high sensor off as well ?

 

[WesG]

There is only one code in. 173-3. That is high voltage from the pipe temp sensor. The ecu checks that it is in range(.06 vdc to 4.9 vdc). That code 173-3 means the pipe temp sensor voltage has been over 4.9 volts for 2 minutes with the engine rpm over 3000 rpm. Sensor is buggered. Lots of the polaris codes have a main large number and a smaller number when displayed on the guage. The large number tells what is buggered while the second small number tells how it is buggered ie voltage high or low, etc. Hope that helps.

 

[RINGER]

ok thanks wes , will this cause the sled to run crappy sometimes?

There is only one code in. 173-3. That is high voltage from the pipe temp sensor. The ecu checks that it is in range(.06 vdc to 4.9 vdc). That code 173-3 means the pipe temp sensor voltage has been over 4.9 volts for 2 minutes with the engine rpm over 3000 rpm. Sensor is buggered. Lots of the polaris codes have a main large number and a smaller number when displayed on the guage. The large number tells what is buggered while the second small number tells how it is buggered ie voltage high or low, etc. Hope that helps.

 

[WesG]

yup. sputtering and missing. runs crappy and sometimes good.

 

[RINGER]

Awesome thats what this one is doing
I am posting for a friend thanks a million for the help we will get a sensor and try it


Ringer

yup. sputtering and missing. runs crappy and sometimes good.

 

[Dragonalain]

Any one know what Engine code 108 - 4 it is on a 13 if that matters. Looked on the web a bit and have some conflicting info on couple different sites.




Sent from my iPhone using

 

[timbo]

108-4=Barometric Pressure Sensor Voltage Low

 

[Dragonalain]

108-4=Barometric Pressure Sensor Voltage Low

Thanks. Will check that out this weekend.


Sent from my iPhone using