2012 assault reverse don't work

[Shawnrobert]

My 2012 assault reverse won't work. Push perc button and nothing. I metered the button and it works. No idea where to go from here. Any help would be great. Thanks

 

[rugbynitro]

No reverse is a pretty big sign of low compression.

Check the compression and let us know what you find.

 

[SnowJunkie82]

Is it idling ok? If not, check compression and if its ok check the TPS sensor.

 

[Shawnrobert]

Sled idles fine. I guess I need a power supply to check the tps. So I have to wait to borrow one from a friend.

 

[Shawnrobert]

I metered the switch for continuity Is that a good way to check it it should I be doing something else?the perc switch that is

 

[Vance Matheson]

The button should still work even with low compression. It might just shut off with low compression.


Sent from my SGH-I747M using Tapatalk

 

[Vance Matheson]

I have the service manual in a PDF format if you want it I can send it to you.

I'll need to text you the link to my drop box in order for you to get it.

Sent from my SGH-I747M using Tapatalk

 

[Shawnrobert]

Would love to have that manual if i can get it from you. Thanks

 

[Russell P]

X2, same, would like to have the shop manual.

 

[Danbot]

Just to be clear....
When you push the button, there is no reaction and the sled continues to idle normally?

In this case, it's usually a throttle lever free play, or throttle safety switch problem, or the idle speed is too high.
It's possible a faulty TPS could cause this but I would expect you to have a TPS fault flashing at you if this were the case.

 

[cdnredneck_t3]

X3 on the manual.

 

[TylerG]

random thought, are you sure its plugged in properly?

 

[Vance Matheson]

If you want the service manual pm your number to me and I will send you a text with a link to my drop box.

Sent from my SGH-I747M using Tapatalk

 

[Rideordie]

I have had TPS issues without any codes getting thrown. The safety pin in the throttle has caused people grief with these sleds as well.

 

[Shawnrobert]

Yup push the button and nothing at all just like I never pushed it. Any idea how to set up the throttle safty switch and the cable tension? Any help would be great. Thanks

 

[Danbot]

Someone can correct me if I'm wrong, but I think I remember the spec was .030" freeplay on the lever.

TSS problems can usually be diagnosed by disconnecting it and see if the problem remains.

 

[Shawnrobert]

With the TSS hooked up it won't idle unless I hold the throttle enough to depress the TSS. If I let off the throttle the engine quits. Any idea what's wrong?

 

[Chrisco]

Ya the cable is to tight !!!!!!!!! you need free play in the cable for the reverse to work.

 

[Shawnrobert]

Problem solved. Everything was linked to my tps being out of adjustment. Set it back up to stock settings and sled works fine

 

[Vance Matheson]

How did it get out of adjustment?

Sent from my SGH-I747M using Tapatalk