2011 etec no reverse

[hdkawi]

just bought an etec and it had the recall done one tank ago last winter. thought it was the switch changed that and still nothing the reverse worked a couple times after the recall

 

[Winter Brew]

Make sure the belt deflection isnt too tight. Does it just die when you hit the button?if so, loosen the belt just a hair and see if that works.

 

[hdkawi]

I push the button an it does nothing

 

[hdkawi]

Just got a service manual could b a fuse

 

[rusty]

I believe the fuses and inter posing relay are on the right side by your foot


Sent from my iPhone using Tapatalk -

 

[hdkawi]

fuse is good ,

 

[hdkawi]

So tool sled apart today and everything looks good . Have a question last owner
Installed a battery to run accessories
And it was stone dead and will not take a charge will this affect the ECU and not let reverse work?
One more question my secondary will not close I've never seen a secondary stay open 1/2 way before the belt is loose and I can not make it close and bring the belt to the top


Sent from my iPhone using Tapatalk

 

[maxwell]

if you run it on a track stand the belt wont go back to the top? or just stationary it wont go back to the top?

 

[hdkawi]

Ya ok that's what I did


Sent from my iPhone using Tapatalk

 

[hdkawi]

The etec can run without a battery right?


Sent from my iPhone using Tapatalk

 

[scully]

Does not require a battery to operate.

 

[Dmf]

its pretty easy to plug the connectors one pin over from where it should be in the multi-function swtich

 

[hdkawi]

K it runs with out battery I thought it should . But I have no power at both the 30A and 5A fuse we tested it while running and the lights work


Sent from my iPhone using Tapatalk

 

[hdkawi]

Now figure me this reverse works but I need a charged battery when battery is dead it don't work


Sent from my iPhone using Tapatalk

 

[hdkawi]

Got it running and reverse works the previous owner added a battery and forgot to add a relay


Sent from my iPhone using Tapatalk