2010 teryx clutch kit?

[sweld]

I am going to be changing my belt on my 2010 teryx, is it worth puting in a clutch kit while it is apart? Or just leave it be. It's totally stock except for 27" zillas, thanks Shawn

 

[TylerG]

I am going to be changing my belt on my 2010 teryx, is it worth puting in a clutch kit while it is apart? Or just leave it be. It's totally stock except for 27" zillas, thanks Shawn

give Chrisco a call @ Parkland Motorsports, he knows these machines and will give you his honest opinion.

 

[tex78]

Mabe just springs. 40 bucks for two

I have 30's and that's all I did

Sent from my HTC-Z710a using Tapatalk

 

[sweld]

Mabe just springs. 40 bucks for two

I have 30's and that's all I did

Sent from my HTC-Z710a using Tapatalk

What do the springs help? More pressure to help the belt from smoking? I got stuck the other weekend and smoked it. It's done wasn't even really that stuck just rocked it a few times and it was out

 

[tomanytoysnotnuftime]

Do a dalton clutch kit. Changes weights and springs, gives adjustability for engine mods, tire sizes and riding styles. Also you could do a overdrive clutch cover, that will increase your top end by about 10kph. It will help with belt issues and bottom end power!!

 

[tex78]

What do the springs help? More pressure to help the belt from smoking? I got stuck the other weekend and smoked it. It's done wasn't even really that stuck just rocked it a few times and it was out

Ya the springs clamp it for and change the belt gear ratio

I have a red secondary spring and low is low.

Sent from my HTC-Z710a using Tapatalk

 

[Showtime]

I thought about changing mine as well, not sure if it needs it but thought i would take off the cover and clean it out but if your that far may as well change it. Are they expensive? i imagine same as a sled belt. How big of a job is it, looks like the feul tank has to come out. Definately could not change one of these on the trail like a Polaris.

 

[99summitx]

I put in the EPI mudder kit, primary spring, weights and Secondary spring on 27" xtr's. Made a big difference, I'm not lookin for speed just low end wheel spin, had the belt light come on twice this weekend both times with diff lock full, winching and one wheel couldn't spin. Happy with it.

 

[sweld]

Took a hour just to get the fuel tank out

 

[tomanytoysnotnuftime]

It gets easier with practise, I've got it down to around an hour start to finish!

 

[tomanytoysnotnuftime]

It gets easier with practise, I've got it down to around an hour start to finish!

 

[sweld]

How are getting the belt on and off?

 

[tomanytoysnotnuftime]

I'm pulling the primary clutch. It's easy with the puller, less likely to damage sheave faces if your not prying open the secondary.

 

[sweld]

Cut my old one off and rolled the new one on.