- Staff
- #21
- Joined
- Oct 21, 2006
- Messages
- 48,082
- Reaction score
- 32,189
- Location
- Edmonton/Sherwood Park
- Website
- www.bumpertobumper.ca
How long ago did the problem start? When you did the delete? Or just recently???
2010 Ram 2500 with 6.7L Mini Max and DPF Delete
- Thread starter Skegmeister
- Start date
growly
Active VIP Member
Easy test for ya, turn on your exhaust brake and see I the noise is there on de-cell, if it is,have a look at the exhaust manifold gasket at #1 and #6. Look for black soot.
butters
Active member
The noise is engine brake on or off. I will look when I'm home, in Costa Rica for another week 
teeroy
Active VIP Member
could the noise possibly be turbo stall? our Cat engines do it when you are on the throttle and chop it to shift....turbo spinning at 100,000+ rpm and you kill the exhaust pressure, makes a burping sound through the air cleaners.
polarisdragon800
Active VIP Member
That would make sense, the air pressure has no where else to go other then where it came from, waste gates will Stick as well, causing "woofing".
- Moderator
- #26
Safe to run on street mode, and never have to worry about head bolts.... If towing use the tow mode and tow mode button on truck..... Will never have an issue.
I did my truck at 10000kms ad now has 65000kms....have towed lots
have several customers over 200,000kms on the deletes etc and never a problem
Hey rick, have you done any 2014 dodge duallys with the mini maxx and full delete pipe setups? If so shoot me a pm, I'd like to know your experience with them and how they are working out, maybe even shoot me a price for the setup and Install price from you please 6.7 cummins
250mark1
Active VIP Member
Pretty sure there is no deletes kits yet for the 13 and up trucks yet
edge has something that is just hitting the market. Soon or maybe just did
they haven't been able to crack the new engine software
I dunno I haven't looked into it at all yet, anyone else able to confirm?
Sent from my iPhone using Tapatalk
Luke The Drifter
Active VIP Member
Theres really nothing out for the DEF equipped trucks right now, lots of red tape and government eyes watching what tuner companies are making available. I highly doubt Edge will be making any emissions delete tunes since the EPA slapped them with a 500k fine a few years back for doing so.
growly
Active VIP Member
It'll be more prominent with the engine brake on.
sent from the van across the street.
sent from the van across the street.
- Thread starter
- #32
Skegmeister
Active VIP Member
I got my kit from RPS just north of Morinville. Richard's Performance Solutions
The cost was about $2600. Sounds like the programmers keep going up in price due to environmental issues in the US, so do not quote me on it. I also got the 4" exhaust, have been thinking about the cold air intake, but so far I have been driving in tow mode and I have no complaints about the power or the mileage.
Everything else is stock except the tires, which I bumped up to 285/70 R17.
Overall I am pleased with the fuel mileage in stock and tow mode pulling a trailer. The street mode works well, getting from 100km/hr to 150km/hr is very fast to pass on the hiway, but usually I do not speed that much. it nice to have it when I need it.
I talked to some performance guys about getting head bolts changed, but the $900 plus labour is steep. I may spend the money to get air bags instead.
The cost was about $2600. Sounds like the programmers keep going up in price due to environmental issues in the US, so do not quote me on it. I also got the 4" exhaust, have been thinking about the cold air intake, but so far I have been driving in tow mode and I have no complaints about the power or the mileage.
Everything else is stock except the tires, which I bumped up to 285/70 R17.
Overall I am pleased with the fuel mileage in stock and tow mode pulling a trailer. The street mode works well, getting from 100km/hr to 150km/hr is very fast to pass on the hiway, but usually I do not speed that much. it nice to have it when I need it.
I talked to some performance guys about getting head bolts changed, but the $900 plus labour is steep. I may spend the money to get air bags instead.
