2010 HO800 Reeds

tysonf.

New member
Joined
Jan 4, 2013
Messages
2
Reaction score
0
Location
Grande Prairie AB
Like I have heard in many instances, my 2010 M8 reeds must be chipped:mad:. I am experiencing a bog and loading up when taking off from idle or decending down from a climb. Just wondering if anyone has a preference of reeds they like using and if there is a difference between brands. Right now for me its between V force or the Boyesen. Any difference? Pros and Cons??

Cheers,
 

schwindt

Active member
Joined
Nov 14, 2011
Messages
84
Reaction score
107
Location
Fruitvale, BC & Sask
Stock reeds are fine if not boosted they last good, if turbo or you don't want to change them for a while try tdr reeds or trd can't remember brand had 1000 boosted miles on mine they were great. I would personally stay away from boy seen or v force
 

ScubaSteveSK

New member
Joined
Sep 28, 2012
Messages
2
Reaction score
18
Location
SK
This more than likely isn't caused by your reeds, but by the engine loading up on oil while idling/decending due to the oil pump injecting too much.

It's a common issue with the 800 cats and you might have to lower the setting on your oil pump. As far as I know the only way to 100% fix the issue is to do an oil injection delete.
 

Doof

Active VIP Member
Joined
Oct 24, 2011
Messages
150
Reaction score
210
Location
Drayton Valley, AB
This more than likely isn't caused by your reeds, but by the engine loading up on oil while idling/decending due to the oil pump injecting too much.

It's a common issue with the 800 cats and you might have to lower the setting on your oil pump. As far as I know the only way to 100% fix the issue is to do an oil injection delete.
If you get your sled serviced by a Cat dealer, they will tune your oil injection to the proper setting the engine will need.

But in terms of reeds, I have Boyesen reeds on my 2011 and have loved them since I got them put in. I was told the difference between the VForce and Boyesen reeds is fairly minimal. Both are better than stock, and will provide slightly increased performance/better throttle response, meanwhile lasting longer than stock reeds. Either way, you will be happy with upgrading to aftermarket reeds.
 

wants snow

Member
Joined
Dec 3, 2009
Messages
14
Reaction score
4
Location
spruce grove
Just installed Boyesen rage cages on my 2010 m8 sp. Nice fit and finish fairly easy install. coolant hoses were the hardest part. Did notice a difference for sure on throttle response. nice and crisp everywhere even at higher rpm. I did not expect to notice anything other then bottem end. Was supprised/ very happy. As for how they will stand up time will tell..
 

T.O.B.C

Active member
Joined
Nov 8, 2007
Messages
27
Reaction score
16
Location
Kamloops B.C
I would be thinking that your reeds are done. I have a 2010M8 with 2000miles on it, every 1000 miles I have had to replace the reeds I'm on my 3rd set of stockers, tipps wear off and or pieces break off. What I noticed was engine loading up when going down long hills when your not on the throttle. Next set will be aftermarket for sure.
 

medler

I love guns
Joined
Aug 6, 2007
Messages
17,676
Reaction score
8,174
Location
Stettler Alberta
Just curious. What are reeds worth?

I have two m sleds one 1,800 miles and one at 1,000 miles


Sent from my phone
 

tysonf.

New member
Joined
Jan 4, 2013
Messages
2
Reaction score
0
Location
Grande Prairie AB
Thanks all for the responses and info. I will try the Boyesen reeds and see if that fixes the issue. I am interseted to see the condition of the stockers i pull out.
 

Newfie1

Active VIP Member
Joined
Apr 1, 2009
Messages
302
Reaction score
123
Location
Moose Jaw Sask
Like I have heard in many instances, my 2010 M8 reeds must be chipped:mad:. I am experiencing a bog and loading up when taking off from idle or decending down from a climb. Just wondering if anyone has a preference of reeds they like using and if there is a difference between brands. Right now for me its between V force or the Boyesen. Any difference? Pros and Cons??

Cheers,
Ran this in my m8 for a full season with no problems.

Set of VFORCE3 Reeds & High Flow Intake
High Flow Intake ; Fits 2005 - 2011 Crossfire & M Series Also 03-06 Sabercat & Fire Cat. Purchased from Rec Supply Saskatoon. Product # 29-905
Lists for $99.95 plus tax
Reeds fit Most 500 - 900 cc Artic Cat here is product # V3112-873B-2 Purchased from Rec Supply Saskatoon.
Lists for $300.00 plus tax
Used on my M8 for 1 year got new HO cat sold old M8. Guy didn't want parts.
Make me a reasonable offer and it's yours.

Text me at
306 630-6059
or message me

 

glengine

Active VIP Member
Joined
Jan 1, 2008
Messages
3,724
Reaction score
1,160
Location
Smithers, B.C.
From my experience the only reeds to go with are stock good, or better boyesen super stock, or best boyesen rage cage.
 

Uptown

Active member
Joined
Feb 15, 2010
Messages
73
Reaction score
20
Location
Edmonton
All this talk about stock reeds chipping sparked my interest. So i tore into my 2010 m8 to check them.
Have 2500km on her, the stock reeds are still in good shape! there is a tiny bit worn on 2 of them at the tips but still seal up well. No corners chipped and none stuck open. I will replace them next year probably with boysen petals.
 
Top Bottom