2009 nytro mcx 240 upgrading to 270 questions

topdog

Member
Joined
Jun 13, 2012
Messages
7
Reaction score
0
Location
EDMONTON
Looking for information on upgrading a mcx 240 nytro to 270hp
anyone have pictures or source to locate the plumbing/ routing etc. Tried searching forums and mcx website w no luck.
I just sent my mcx ecu to Prince George Yamaha for 270 remap.
I have a high flow external spare pump from my past mcx 310 apex
I will have to pick up a fuel regulator still.
Apreciate any info, thanks
 

Tuesday

Active VIP Member
Joined
Nov 16, 2008
Messages
264
Reaction score
199
Location
Lacombe
think you have it nailed pretty close. Flash, fuel reg, and pump. You also have to adjust your wastegate and possibly some clutching depending on what you have.
 

topdog

Member
Joined
Jun 13, 2012
Messages
7
Reaction score
0
Location
EDMONTON
Thanks Tuesday ,just figured mcx would have a instruction list for the upgrade avail.
2009 nytro w mcx 240
174 3" extreme
3" forward z broz
cr tunnel and bling
 

topdog

Member
Joined
Jun 13, 2012
Messages
7
Reaction score
0
Location
EDMONTON
Finally found a diagram on configuration. Would anyone know the malpassi fuel regulater part # or where I could get one? Thanks!
 

YamaDad

Active VIP Member
Joined
Apr 8, 2011
Messages
173
Reaction score
178
Location
Redwater, Ab
A tunnel dump exhaust would be good if you don't already have it.

Are you leaving the stock fuel pump in the tank and adding a second or deleting the stocker? My Powderlites/Boost it setup deletes the stock one. It runs great but occasionally vapour locks and we need to take a time out. I'm not sure if running both pumps would help or even if it's a good idea.
 

rknight111

Administrator
Administrator
Moderator
Joined
Sep 27, 2006
Messages
13,704
Reaction score
23,489
Location
Parkland County, AB and Valemount, BC
Website
www.snowandmud.com
Looking for information on upgrading a mcx 240 nytro to 270hp
anyone have pictures or source to locate the plumbing/ routing etc. Tried searching forums and mcx website w no luck.
I just sent my mcx ecu to Prince George Yamaha for 270 remap.
I have a high flow external spare pump from my past mcx 310 apex
I will have to pick up a fuel regulator still.
Apreciate any info, thanks

Where are you located. Darren B at E&S motorcycles in fort saskatchewan is very well versed with the mcx turbos on yamaha’s.
 
Top Bottom