2005 M7 Clutch Weights

00arcticwhite

New member
Joined
Dec 20, 2011
Messages
3
Reaction score
2
Location
Anytown, SD
Hey, i just bought an 05 M7 that is all stock with a 153" attack 20 track. I just bought some Cutler IT adjustable weights and was wondering if anybody knows or has seen any elevation charts for the M7. I need to know how much to load up the weights for each elevation. At home i am at about 1600 ft, but also need to know what weight to run for the hills, about 3,000-5000 ft. And should i get another primary spring? Any online charts you guys have seen? Any help is very much appreciated.
 

moyiesledhead

Active VIP Member
Joined
Oct 12, 2008
Messages
5,455
Reaction score
10,890
Location
Moyie B.C.
There should be a decal under your hood with all that on it...right above the left side shock if memory serves me.
 

Mare

Active VIP Member
Joined
Oct 23, 2007
Messages
3,705
Reaction score
538
Location
WESTLOCK AB AREA
Hey, i just bought an 05 M7 that is all stock with a 153" attack 20 track. I just bought some Cutler IT adjustable weights and was wondering if anybody knows or has seen any elevation charts for the M7. I need to know how much to load up the weights for each elevation. At home i am at about 1600 ft, but also need to know what weight to run for the hills, about 3,000-5000 ft. And should i get another primary spring? Any online charts you guys have seen? Any help is very much appreciated.


I have an 05 M7, I will go out and see if I can get a picture of the chart, might not work due to lighting, but I will try.
 

Mare

Active VIP Member
Joined
Oct 23, 2007
Messages
3,705
Reaction score
538
Location
WESTLOCK AB AREA
OK, it worked better than I thought. Here is the chart on my 2005 M7. Hope this helps you. :D
 

Attachments

  • 2.jpg
    2.jpg
    175 KB · Views: 127

00arcticwhite

New member
Joined
Dec 20, 2011
Messages
3
Reaction score
2
Location
Anytown, SD
Thanks Mare, That's what i was looking for. I know exactly where your sticker is and mine definately isn't there anymore...no idea why anybody would tear it off? I'll probably print one off and laminate it :) Thanks again, much appreciated.
 
Top Bottom