2004 Summit Rev 800 repair

[PS94]

So, the kid renting my house found himself a sled...he's not to mechanical, so I guess I'm fixing it.

It's a 2004 Rev Summit, new 800H.O Crate motor...It got run with the e-brake on and lit on fire. Previous owner swapped wiring harness, but we have no spark. Doesn't seem to have the 12V to the coil.

Anyone have wiring diagrams as a starting point?! Our local dealer claims to have none...

We also have a plug for the altitude compensator just chilling...this...is gonna be fun.

 

[TylerG]

So, the kid renting my house found himself a sled...he's not to mechanical, so I guess I'm fixing it.

It's a 2004 Rev Summit, new 800H.O Crate motor...It got run with the e-brake on and lit on fire. Previous owner swapped wiring harness, but we have no spark. Doesn't seem to have the 12V to the coil.

Anyone have wiring diagrams as a starting point?! Our local dealer claims to have none...

We also have a plug for the altitude compensator just chilling...this...is gonna be fun.

if you talk to Ric (Summitric) I know he had an 800 rev catch fire from the same issue. he may have some info he can hook you up with.

 

[slededjr]

Your local dealer is full of BS. All the diagrams are on the BUDS system. I have the diagrams somewhere. I'll look for them tomorrow. PM me a email address to send them to.

 

[tex78]

I have the skidoo manual on disk for a 04 rev somewhere, and I have one I printed off and stuck all together... Since I moved, not sure 100% where it's at

 

[slededjr]

Sounds like we're in same boat Tex. I'll post back here when I find mine incase you're still looking.

 

[Summitric]

I have the shop/service manual, if you're ever down in Edmonton... You'd have to find a way to photocopy.... Staples is just down the road. Yup, went through the same thing, park brake left on and Fire ,,,


Sent from my iPad using Tapatalk

 

[LBZ]

I have a PDF copy but it's too big to share or email (107mb). Otherwise I would send it to you.

 

[Vance Matheson]

a link to the shop service manual in pdf, let me know if it dosent work

https://www.dropbox.com/s/xwhpumdccrmu88l/rev repair manual.pdf.pdf?dl=0

 

[PS94]

Well we got spark. The compensator plug was supposed to be plugged into the Computer. But there was a different square six prong in there. She's actually running now. Not sure where this other plug goes! Gotta find a pull start handle holder, and a Caliper and that kid should be brappin!

 

[nielsy]

the one you plugged into mpem is probably your diagnostic plug

 

[gilligan609]

I downloaded the whole service manual from a website. Can't remember which site it was but it cost me $5 for the whole thing. Just search it on Google.