2000 triple touring

Fredd4

Member
Joined
Jan 27, 2011
Messages
6
Reaction score
0
Location
ontario
Can anyone tell why my 600 triple touring is back firing. It runs along just fine and then for no apparent reason I loose power then I have to feather the throttle to get it going. This is when it back fires and then it seems to be ok and runs hard again.
 

Fredd4

Member
Joined
Jan 27, 2011
Messages
6
Reaction score
0
Location
ontario
Thanks trollcat I will try that. Is this a common problem? Also where do I find the switch?
 

TROLLCAT

Active VIP Member
Joined
Nov 23, 2010
Messages
71,191
Reaction score
39,143
Location
Dease Lake BC
The pin on the thumb throttle inside handle bar control , its a safety if you fall off and the throttle sticks it kills the machine, there should be 1/16 inch play on thumb piece , tighten cable at all three carbs, its common problem
 

Fredd4

Member
Joined
Jan 27, 2011
Messages
6
Reaction score
0
Location
ontario
Worked like a charm trollcat thank you very much. I'm sure you saved me a lot of money.
 
Top Bottom