19-53 fits MINT in T3 XM 154~174 chaincase...

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,047
Reaction score
6,783
Location
Edmonton
You are correct, thank you very much, will see if matt still has his.
 

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,047
Reaction score
6,783
Location
Edmonton
I dont know what sled you have.
Caper11 ran 21-53 in his T3 sled with 114p chain.
Alex is running 19-53 in his T3 sled with 112p chain.
BRP spec for T3 says...
154; 21-49 w/112p chain,
163; 21-51 w/112p chain,
174; 19-49 w/110p chain....so I suspect if you have this one, then you might be getting a 112p chain to run 19-53

And how much is your clutch kit for my 174 ,
 

DUS

Active member
Joined
Nov 21, 2012
Messages
144
Reaction score
271
Location
KCPGTN
Catman,
That’s my sled Joe posted.
2015 174” T3
Stock was 19/49 gears with 110P chain
Put in 19/53 gears, the 110P would NOT fit. So close but did not fit.
Need to go to a 112P chain.
 

1100

Active VIP Member
Joined
Sep 7, 2008
Messages
1,220
Reaction score
1,729
Location
sangudo
Any one manage to get a 110 chain on a 21-51?
 

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,047
Reaction score
6,783
Location
Edmonton
After reading about the clutch kit sounds like my best option for me is stock gearing and joes kit as I know doos stock clutching isn’t that great.
 

Dynamo^Joe

Active VIP Member
Joined
Aug 17, 2007
Messages
227
Reaction score
790
Location
Thunder Bay, Ontario
How does that clutch kit work below 4000 feet as I would likely be riding local every now and then , clickers adjust it enough too make it work.
Lets say you run 5500[6500]7500
• 15.9 grams, clicker 3 for 4500’~6500’ @ 7900~8000rpms
• 15.3 grams, clicker 3 for 5500’~7500’ @ 7900~8000rpms
• 14.5 grams, clicker 3 for 6500’~8500’ @ 7900~8000 rpms
• 13.9 grams, clicker 3 for 8500~10500' and higher clicker 4 or 5
• 12.9 grams, clicker 3 for 10500~12000 and higher clicker 4 or 5

15.3 grams in clicker #3.
When you are down at home, run clicker 1 and that will get you around fairly decent. Wont be 100% capacity but i'll squirt the snow out the back still. Like say Edmonton area at 2100 feet, it will run 8~8100 because of the weight. But if wanting 100% capacity then 20 grams, click 3 and hang on.
 

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,047
Reaction score
6,783
Location
Edmonton
Lets say you run 5500[6500]7500
• 15.9 grams, clicker 3 for 4500’~6500’ @ 7900~8000rpms
• 15.3 grams, clicker 3 for 5500’~7500’ @ 7900~8000rpms
• 14.5 grams, clicker 3 for 6500’~8500’ @ 7900~8000 rpms
• 13.9 grams, clicker 3 for 8500~10500' and higher clicker 4 or 5
• 12.9 grams, clicker 3 for 10500~12000 and higher clicker 4 or 5

15.3 grams in clicker #3.
When you are down at home, run clicker 1 and that will get you around fairly decent. Wont be 100% capacity but i'll squirt the snow out the back still. Like say Edmonton area at 2100 feet, it will run 8~8100 because of the weight. But if wanting 100% capacity then 20 grams, click 3 and hang on.

Excellant info , I will likely order a kit with 15.3 grams sounds like it would be an improvement for sure over what I have ,will be in touch, thx Joe
 

Scottish88

Member
Joined
Dec 10, 2017
Messages
7
Reaction score
20
Location
Calgary
Catman,
That’s my sled Joe posted.
2015 174” T3
Stock was 19/49 gears with 110P chain
Put in 19/53 gears, the 110P would NOT fit. So close but did not fit.
Need to go to a 112P chain.

Where’s the best place to buy 53 tooth gear and 112p chain? Skidoo dealer?
 

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,047
Reaction score
6,783
Location
Edmonton
Howdy, You can only get the 53 gear from skidoo. BRP# 504153778
Rec suppy has the 112p chain #017-112-13

I have a chain and gears out of a 163 T3 21-51 112 chain so would just need the 53 , use my 19 and the 112 chain , buy 53 and good to go
 

DUS

Active member
Joined
Nov 21, 2012
Messages
144
Reaction score
271
Location
KCPGTN
Where’s the best place to buy 53 tooth gear and 112p chain? Skidoo dealer?

I actually lucked out and found the 53 tooth gear on eBay. Trickier to find as I think that it only came out in the last few years.
The next day I hung up the phone as it was ringing to the dealer cause a 112p chain popped up when I refreshed my eBay search.
Neither seem overly popular on eBay.
If it wasn’t for lucking out there or on Kijiji it would have been purchased at the dealer.
 

DUS

Active member
Joined
Nov 21, 2012
Messages
144
Reaction score
271
Location
KCPGTN
I have a chain and gears out of a 163 T3 21-51 112 chain so would just need the 53 , use my 19 and the 112 chain , buy 53 and good to go

Check eBay. There was another 53tooth listed when I bought mine.
 

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,047
Reaction score
6,783
Location
Edmonton
Well I had a 112 Chain and a 19 tooth top gear, a super nice guy on s & m just sold me a brand new 153 tooth bottom gear. Might have a turbo for sale set up for a XM , if interested let me know .
 
Top Bottom