13 e start HID conversion check engine light on

yammyman

Active member
Joined
Jul 13, 2010
Messages
144
Reaction score
78
Location
Sorrento, BC
I installed Retro Solutions 35w 5000k HID's on my 13 estart and my check engine light comes on. I haven't actually had the code checked, yet. I talked to my dealer, they didn't haven't much to say other than that it's because of my HID lights (no kidding, lol).

Also had a grey film on the interior lense that was very hard to clean off.

Anyone know what the code would be? Can the computer possibly be reflashed or something?
 

BeachSled

Active VIP Member
Joined
Apr 2, 2009
Messages
956
Reaction score
1,238
Location
Sherwood Park
Are the lights wired to the battery for power with a relay or are they powered right from the wire harness that plugs into the factory bulbs ?
 

yammyman

Active member
Joined
Jul 13, 2010
Messages
144
Reaction score
78
Location
Sorrento, BC
Factory harnes signals the relays which allows power from the battery to the ballasts
 

BeachSled

Active VIP Member
Joined
Apr 2, 2009
Messages
956
Reaction score
1,238
Location
Sherwood Park
Huh.... Well that's the way I have seen it work correctly before. Seems like if you try and power the ballasts from the factory harness is when you get problems. But not in this case for you. Good luck buddy, hope you get it figured out.
 
Top Bottom