12lbs boost at 2000ft

[kingcat162]

Reeds might be done - gonna put in the shop now and check them

 

[kingcat162]

Folded the cages in a bit - used the bolt as a reverse press - unscrewed the nut an pressed them back straight - gonna try 11lbs now see if they hold up

 

[Cableguy]

which sled is this and whose kit is crankin out 12 psi
stock reeds?

 

[kingcat162]

which sled is this and whose kit is crankin out 12 psi
stock reeds?

2015 xm 174 TSS centre mount - force turbo reeds - if the stock cages could handle the 12lbs I could probably push 12 all day - it hit rev limiter and was a bit rich - backfired out the pipe and bent the stock cages - but I fixed them

 

[kingcat162]

Shelbourne works awesome - no Det codes or anything - my wastegate is buggered not letting out the pressure - feeding every last bit to the motor - I felt the bars flex when she grabbed 12lbs - 225 lbs of human it was trying to leave behind

 

[kingcat162]

If anyone is in the Vermilion AB area this weekend they can witness me running my dirty banana running 8lbs-11lbs at 2000ft and my old kingcat zinging down the track at the airport

 

[oler1234]

Folded the cages in a bit - used the bolt as a reverse press - unscrewed the nut an pressed them back straight - gonna try 11lbs now see if they hold up//uploads.tapatalk-cdn.com/20200123/f8c1149846d7438e0f93123dc90773fb.jpg//uploads.tapatalk-cdn.com/20200123/1cee950ba1ae88762dec010c5647e0a0.jpg

negative there... just drill the bottom side the cages and bolt the cages together. You can use a much smaller bolt as well.

 

[kingcat162]

negative there... just drill the bottom side the cages and bolt the cages together. You can use a much smaller bolt as well.

I used the bolt as a reverse press - i put the bolt with the nut inside each block half and turned the nut outwards to lightly bend the reed block into submission and back to its original state - I refuse to assemble the 2 half's together because if the hardware ever came loose - buh bye motor - and especially a boosted xm - that etec shakes worse than Ozzy Osbourne at 8lbs boost

 

[Sledkrew61]

Do you have a clutch kit in that sled for low sea level because mine keeps kicking in the knock sensor so I increase the main fuel on my xic controller because I'm running the tss turbo to

 

[kingcat162]

Do you have a clutch kit in that sled for low sea level because mine keeps kicking in the knock sensor so I increase the main fuel on my xic controller because I'm running the tss turbo to

I've got a high elevation clutch kit just with quick clickers the 800 etecs are bad for having issues when they are turbo'd and see a reduction in track load when they are spooled up

 

[Caper11]

Which one of your tachs is reading correctly?

 

[kingcat162]

Which one of your tachs is reading correctly?

That's a good question - 1 of em is lagged out for sure - that's a screenshot of my GoPro footage aimed at the gauges - I'm too busy trying not to crash to watch em

 

[catmando]

I got another Instaboost for sale if ya need some parts lol New turbo. Will toss in the one that was removed as well as a upgraded oil tank

 

[kingcat162]

I got another Instaboost for sale if ya need some parts lol New turbo. Will toss in the one that was removed as well as a upgraded oil tank

The only thing I've been wrecking is skis lately due to the lack of snow

 

[catmando]

The only thing I've been wrecking is skis lately due to the lack of snow

Just in case

 

[bendy]

I saw the Dirty Banana was at the Sicamous sled show and shine.

 

[NoBrakes!]

Where has he been? Always loved to see some innovation