09 ski doo summit 800 gauges quit working

[Snow Guy]

Rpm, speedo, fuel, temp, km all quite so basically nothing works. Reverse does work but beeper does not sound nor do any of the lights on the dash work. I think the computer does work though because the reverse works fine. Any help would be nice
Thanks

 

[RGM]

You probably have a cracked lens that has let water in and rusted/shorted out something. You can take it apart and clean it up and maybe do some soldering to get it going again.

 

[Snorider]

crud this just happened to mine. reverse and sled runs fine, just no lights, guages, or handwarmers. so tear it apart and see what I find huh? last resort is new cluster?

 

[Snorider]

or what did you do on yours to get it fixed snow guy?

 

[mxz sledhead]

When you pull gauge cluster off 5 screws that hold the top on there a connection there un plug it and check for corrosion pick up some diealite grease[for electrical connections] and coat and pug it back in may solve the problem also check your grounds one behind the muffler

 

[Snow Guy]

Found out that a fuse was blown on mine, the fuses are right by the oil tank on the sled, it was a 20 amp, that was blown. replaced it and everything worked fine no issues since, don't really know why it blew, but i had my heated visor plugged in when it happened, haven't plugged it in since and no issues, so i just wired it in to the battery.