09 m8 10k ft running 7600rpm- help

[kactoe]

Just got a new 09 that was sitting at the dealer m8 162 sno pro - Its got a black with organge dot primary spring and 75 gr weights - at 10000 ft I'm only getting 7600 rpm and the thing is a dog, but at 7000ft It's at 7800 rpm- What is the trick setup so I can change weights easily and keep it up at 7900-8000

I had an xp and the clickers were a sweet setup so I could change the weights depending on where I was riding and keep the rpms exactly where they needed to be to get the most power in less than 3 minutes on the trail- no way I'm going to tear down a clutch everytime I go to a different elevation.

What are you cat guys doing to keep them in the proper rpm's?

 

[tchriste]

Adjustable weights...Dalton and Culter work good as you don't have to remove the weights to adjust. (75g are stock up to 6,000 ft....73g 6,000-9,000 ft. with a white/yellow spring)

 

[m8welder]

I run the dalton ajustables they work great, 73g-81g adjustability. Easy to add or lose weight on the fly all you need is the allen wrench.I run around 8000rpm but thats cause the slp pipe I have.