09 Grizzly 700 Display

[snitter]

The battery went dead on my quad and after replacing it the display flashes an"E". Does that mean the display needs to be replaced. I heard that Yamaha had a service bulletin out on this covering it till Dec./14. If anyone knows anything about it please reply.

 

[AreWeThereYet]

You tried boosting it while the battery was dead, instead of putting a boost on the battery right?

Pretty sure moniter is toast, unless they released something to make hell freeze over.

 

[medler]

So if you leave the key on and it dies you can't boost it with another quad ?


Sent from my phone

 

[whoDEANie]

You should be able to boost it just fine with another quad as long as you're not a door knob like me and hook up the cables backwards! I'm afraid the big E stands for "Eeek, your POD is toast and costs a fortune to replace." I did this to mine a couple of years ago, and despite what I was told, the dealership said there was no service bulletin or special warranty on this. On the upside, the POD is where your hours and mileage are stored - with no way to reprogram the odo on these things, you just took 4 years off the age of the quad!

 

[AreWeThereYet]

So if you leave the key on and it dies you can't boost it with another quad ?


Sent from my phone

You can, but you have to let the dead battery charge up for a bit before trying to start. There is something crazy in the system that hoops the monitor if you attempt to boost a dead battery. It doesn't happen all the time,.. BUT it does happen.

 

[medler]

You can, but you have to let the dead battery charge up for a bit before trying to start. There is something crazy in the system that hoops the monitor if you attempt to boost a dead battery. It doesn't happen all the time,.. BUT it does happen.

Ok. Well that's great info thanks J

And dean I do remember you talking about wrecking yours to.
I am on my second battery for mine. The OEM one barely lasted two years


Sent from my phone

 

[gordhunt]

Check eBay for that part

Sent from my S4

 

[whoDEANie]

Snitter, I just sent you a PM. I have a buddy that is parting out an 07 Grizz. You'll have to check with a dealership or something to see if the 07 display will work on an 09.

 

[Megrizzly]

Link to the service bulletin.

Service Bulletin on the BIG E - Yamaha Grizzly ATV Forum

 

[whoDEANie]

Link to the service bulletin.

Service Bulletin on the BIG E - Yamaha Grizzly ATV Forum

Thanks man! ...I wonder if I can get the dealership to refund me what I paid for the new pod if I bring this in with me.

 

[Summit 934]

Just wondering if anyone has ever found a fix for the gauges with the flashing “E” problem, or a dealer that won’t rape you to replace it with a new one. 09 Grizzly 550 doing the same thing.

TIA

 

[zal]

Link to the service bulletin.

Service Bulletin on the BIG E - Yamaha Grizzly ATV Forum

Just wondering if anyone has ever found a fix for the gauges with the flashing “E” problem, or a dealer that won’t rape you to replace it with a new one. 09 Grizzly 550 doing the same thing.

TIA

Have you read the bulletin?

 

[Summit 934]

Have you read the bulletin?

That campaign expired Dec of 2014.