06 rev. Good Machine?

dooryder

XP V.I.P. Member
Joined
Nov 9, 2007
Messages
4,072
Reaction score
98
Location
Blue river/ edmonton
i have an 06 x and its an amazing machine, i have over 6500 km on mine, and i only took out the top end but it was my fault, broke a oil injector valve off when i put the motor back in after fixxing bulk head , didnt relize what i did at the time till the piston seized
 

dooryder

XP V.I.P. Member
Joined
Nov 9, 2007
Messages
4,072
Reaction score
98
Location
Blue river/ edmonton
seat clutch, and rebuilding shocks, and i think the steerign post but could be wrong on that, i got the adreniin clutch (the fugger riped me off) in mine, but gunna be putting a team in this fall
 

dooryder

XP V.I.P. Member
Joined
Nov 9, 2007
Messages
4,072
Reaction score
98
Location
Blue river/ edmonton
its the 440 race seat with a grippy cover and no storage and yes its alot light IMO, im not sure but must adreniline i see have a steering post with handles bars with the riser built in sort of say if you get what i mean
 

spitfire340

Active member
Joined
Mar 1, 2008
Messages
34
Reaction score
6
Location
Rimbey
The '06 x sleds came with a 9 tooth driver and a 2 1/4" track (powdermax without huge holes in) probably the best stock track out there, pull out the 21 tooth top gear in the chain case throw in a 19 and your in business.
 

Slamnek

Active VIP Member
Joined
Nov 14, 2006
Messages
2,826
Reaction score
1,570
Location
Kitscoty
It gears the sled down to get more low end grunt and you will hold track speed longer. 06 revs are great sleds
 

POWDERCHOWDER

Active VIP Member
Joined
Dec 4, 2006
Messages
609
Reaction score
107
Location
EDMONTON
or put 7 tooth driver to fit 2 1/2" paddle and run polaris primary and team secondary piped and reeds and you have a serious contender trust me, that is the best setup i have tryed yet.
 
Top Bottom