06 M7 way to much oil

monster15

New member
Joined
Dec 23, 2015
Messages
2
Reaction score
0
Location
Airdrie
Hey guys I have a 06 m7 and about a year ago I turned out my oil injection rod to run the sled a little leaner, cause I was burning almost an entire tank of oil to a tank of gas, after I adjusted the the rod I marked the oil level in the tank with a maker then ran it all day and then added gas and oil then did the calculations and it was around 40:1 sled ran awesome like this for over a year until Saturday I went through 2 sets of plugs and over a tank of oil what would cause the sled to all of a sudden drink a ton of oil like this ? Any ideas
 
Last edited:

slomo

Active VIP Member
Joined
Feb 8, 2007
Messages
809
Reaction score
123
Location
in my garage
rod fell off and defaulted to full oil all the time is my guess
 

monster15

New member
Joined
Dec 23, 2015
Messages
2
Reaction score
0
Location
Airdrie
No it's still on there, think I'm going to plug the two oil lines that go from the pump up to behind the throttle body(I think that's where the oil gets injected ) and leave the oil line to the pump cause as far as I know the oil also lubricants water pump assembly
 
Top Bottom