05 summit sliders

[summit88]

i was thinking its about time to replace the sliders on my 05 summit. can anyone give me some tips or advice i might need to do the job since i haven't done this before? thanks.

 

[Summiteer]

Cut one set of windows in your track a bit bigger to allow you to pull slider out the hole. Or remove your skid so you can have a close look at all the parts.

 

[jay007]

I cut the windows in the track on my 05 summit, I did not cut 2 windows on the same row, and I used a dremmel tool so it would knida melt into it not cut. Worked good, no problems, much faster.

 

[CUSO]

Cut one set of windows in your track a bit bigger to allow you to pull slider out the hole. Or remove your skid so you can have a close look at all the parts.

Yep. pull your skid, check your parts, see if you need new bearings, bushings...etc.. it is only 4 bolts.