03 mountain cat gets some upgrades °FossY°

[FossY]

well thought i could have my own thread for my sled (sleds :d)
like some folks know i bought a new cat 2003 and wanna upgrade her a little bit

started last weekend and did some work this weekend

snow eliminiators are done now






upgrades so far on the sled

powermad 3" riser
somekind of can ( dont know which brand)
sledjunkie drop braket
boss seat (WITH BUILD IN FUELTANK !!!)
16x151 2" track
snoweliminators
leather tankbra
bellypan

 

[FossY]

here a picture of the build in fueltank in the boss seat




mods im still planning on doing

replacing front lower bellypan plastics from grey to black
sliders replacing grom green to orange
little painting here and there
putting on my custompainted windshield
replacing hood from my 02 to the 03
polishing tunnel
putting on my 6" adjustable riser ( thanks again to bigdawg69 )
arctic cat handguards in orange ( should be here pretty soon)
lefti throttle

 

[HagmanMod1]

i've got an 1000 speedwerks kit for 800 or 900 carbed cat $1000

 

[catmando]

Fossy
Sled is looking real good,With that extra fuel in the seat you should get rid of that rack on the back and get a snow flap on that thing.Also the other thing I would recomend is a set of Powderhound ski,s.I found they are much better than stock!
catmando!

 

[FossY]

well you know i want to get it off
and jesus you didnt lie about the polishing
i did a testspot end ..... oh yeah it takes time !!!!!!!


any ideas what i could do to little scuff marks and scratches in the tunnel before i polish ? cause u want get them out while polishing

 

[Murminator]

Looks good foss....nice step by step

 

[FossY]

went out today and had a awesome day ditchbangin arround battleford and murray lake

got my hood all done last week
and im pretty happy with it

i did the design and got it done in a local shop

what you guys think ?

 

[bigdawg]

Looks good Fossy hard to misplace you on the hill lol.

BD

 

[catmando]

Yup.looks real good.........Like BD said,we wont have any trouble finding you!
catmando!

 

[dooryder]

how much fuel does that seat hold?

 

[rmksledder]

well you know i want to get it off
and jesus you didnt lie about the polishing
i did a testspot end ..... oh yeah it takes time !!!!!!!


any ideas what i could do to little scuff marks and scratches in the tunnel before i polish ? cause u want get them out while polishing

take a power sander with a lite grit and scuff it up a bit then finish is with a liter grit then polish.

 

[FossY]

how much fuel does that seat hold?

hold 5 gallons pr and is directly hosed into the main tank

 

[dooryder]

thats pretty cool. thanks FossY

 

[Zar]

Nice Sled

I just put on a set of sled junky drop brackets ( havn't tried them yet ). Did you have to extend your brake line for the 3" riser. I tried to installl a 2" riser and it wouldn't work with the stock brake line. I thought that 2" rise would be no problem before adding cable etensions and messing with brake lines. How was the snow eliminators to install ? Do they weaken the tunnel or add strength ? The sled looks good. :d

 

[SLEDBUNNYRACING]

Looks awesome Fossy.

 

[FossY]

Nice Sled

I just put on a set of sled junky drop brackets ( havn't tried them yet ). Did you have to extend your brake line for the 3" riser. I tried to installl a 2" riser and it wouldn't work with the stock brake line. I thought that 2" rise would be no problem before adding cable etensions and messing with brake lines. How was the snow eliminators to install ? Do they weaken the tunnel or add strength ? The sled looks good. :d

to ypur riser question
i had a 3" on my other sled and it doesnt work with the throttle
u tunr it fully and the throotle cable hooks out of onnection
brakeline you have to extend already at 2" rise
so you will need brakeline and throttleextension
took me prob total 30minutes to install those 2 items with bleeding the brakes after youre done

the eliminators i did a step bz step tutorial you can find this here

if they add now strength i dont know would think so cause they defenatly dont weaken it

https://www.snowandmud.com/forum/f55/how-too-install-snoweliminators-8763.html



thx so far for the ups guys prob will post some more pics on thursday
couple closeups from the skulls and the numbers there is quiete the detail in them

 

[ZRrrr]

Nice work!

Needs a snowflap

 

[Summitric]

Nice, fossy.... I really like the hood, man..... You've done a great job so far.... Keep plugging away on it...... A little here, a little there. Did i say, i really like the hood? Cool!

 

[WCTHEMI]

Very nice, that hood is frickin' sweet.:d

 

[Dr. Meatman]

looks good damm good fossy, need a set of 2cool vents for the side plastics?

i'm currently parting out one of my sleds so if anyone is looking for 1M stuff PM me i can tell ya what i got....couple hot items

8in powermadd riser
throttle extension
throttle block
fly handlebars

PM me if there is something in perticular you're looking for

sorry for hijacking the thread