02 polaris Edge 800

2stroker

New member
Joined
Jan 16, 2007
Messages
4
Reaction score
0
Location
Edmonton
Hey guys. I bent the steering post and need to know.. Do I need to have motor pulled to replace it or can It be done as is sits?? :beer: Cheers
 

Black08Brute

Active member
Joined
May 14, 2008
Messages
143
Reaction score
20
Location
Barrhead
I believe that there was a recall on the steering post on those sled's well on the 03 there was, Might be free for ya.
 

E-Zmoke

Active VIP Member
Joined
Oct 12, 2008
Messages
1,515
Reaction score
2,751
Location
BC
Pull it. Depending on where it's bent?
 

Rockwerx

Active VIP Member
Joined
Nov 26, 2006
Messages
272
Reaction score
19
Location
Sherwood Park
You have to pull the engine. If you bend the steel one and try and bend it back the metal can break off. This happened to my friend when we were out in the Renshaw...50 miles from our truck...I do not know very many people that could have riden a machine out of that area with no steering. If you can find a stronger one than stock it would be well worth it. I am not sure if you can get them in titanium still or not.
 
Top Bottom