Wiring plugs on xm

Lightningmike · Nov 29, 2013

Wondering if anyone knows how to get the small plugs for the handle bar warmers out of the connectors. Changing my bars and put new heaters on. Almost ready to cut and splice wires. Grrrrr. Thanks in advance for help

Sent from my SGH-I547C using Tapatalk

teeroy · Nov 30, 2013

you need a small pick and go in from the backside of the plug where the wires go in. there is a little tab inside there you can depress and the wire and metal end will pull out of the plastic plug.

Lightningmike · Nov 30, 2013

Is there part of the metal you can see that stays in the plastic part or is all the metal you can see part of the wire end? The tab to push is a little plastic one kinda on bottom of wire end?

Sent from my SGH-I547C using Tapatalk

kimrick · Nov 30, 2013

Refer to your owners manual.
It explains it very well and at least shows pics.
Removal instructions start on page 67 I believe.
Better to do this rather than damaging up perfect plugs.
Hope this helps!

Video link below
http://www.youtube.com/watch?v=z81aeERla3w

Lightningmike · Nov 30, 2013

Awesome. Thanks guys I will give it another whirl tonite. Let you know if I succeed.

Sent from my SGH-I547C using Tapatalk

Lightningmike · Nov 30, 2013

Well, got all the plugs out, ruined one but I can fix. Thanks again guys .

Sent from my SGH-I547C using Tapatalk

Wiring plugs on xm

Lightningmike

Active VIP Member

teeroy

Active VIP Member

Lightningmike

Active VIP Member

kimrick

RIP Fellow Sledder

Lightningmike

Active VIP Member

Lightningmike

Active VIP Member

Similar threads