A little further away but I got the best pricing for the last 2 RZRs I bought at Spectra in Williams Lake. Both times just took detailed pics of trades and did the deals over phone and email. They even met me in Kelowna with the last one but they did have another delivery as well.
Dealer I got it from is a 2.5 hr drive and the closer one wasn't very helpful since I didn't get from him. You can find quite a few complaints online with the same problem with the auto choke. Other than that it cuts, mulches and bags better than any other mower I have ever owned.
I bought a honda last year it been good except the damn auto choke. If I cut the front lawn and take a short break before doing back lawn the auto choke floods it and I have to wait about an hour for it to start. The dealer response was that is common and to just run it out of gas if I want to...
They do tend to quote reman only but you can get used out of them if they haven't started tearing down the machine yet. there is also these guys down in langley area as well.
https://www.usedexcavatorparts.ca/
Have you tried these guys in the lower mainland. They are the ones we use at work
https://www.brikers.com/
https://langleyexcavator.com/?gclid=EAIaIQobChMI0f6h_eOL6wIVRAnnCh1dQgt8EAAYASAAEgLcrvD_BwE
Brikers is all makes while Langley is mainly Hitachi and JD.
There is also a temp sensor that lets the computer know the engine is cold enough to need glow plugs that can fail. We also have an 01 at work that after a lot of testing ended up being no signal to the relay from the computer.
Check the merritt club they have styoma and honeymoon. The club used to throw a spring fling ride at honeymoon not sure if they still do. It had a ****ty sidehill trail in which discouraged to many from going in but could have changed since I have been out of sledding for a few years now.
I you can get grindings when they are just removing the top of the asphalt work the best for binding. If its pulled up with a hoe and crushed later you can end up with more roadbase than asphalt in the mix.
I read the link but a 400lb tank isn't exactly portable and from reading link should have needed a permit. I had it certified and filled and delivered back no questions asked. The only thing I had trouble with was the hose. No one would sell me a hose to hook tank to rv so I bought a tiger torch...
I wonder who enforces this reg in BC. In the fall I had a 400lb tank certified, filled and delivered to where I have my rv set up at work and no one even asked about a permit. It was done through superior propane.
One thing with Capri is don't lets others ride your sled their offroad policy only covers immediate family residing at insured address. They may have changed in the last 5 years since I switched to Got Toys so I didn't have to put second coverage on my atv for my dad to use. I just put 1 mill...
It's getting pretty hard to get $150 an hour for a 200 size around the lower mainland. The new canadians are getting into equipment now and are slashing the rates like the trucking industry. We have lost some customers at work because some are putting out 200 size for $90 -$95 an hr and...
I double checked you links and they are only $100 apart. When I originally bought mine I also had atvs and didn't think I needed bigger now I'm looking at replacing with a 8000lb 2 post hoist then it's easier for car repairs as well.
I had an older lift king and it worked decent but it was straight air and you had to rock it a little bit to lift the rzr 800 but wouldn't lift a rzr900. The original lift king was an offshore copy of the rotary atv lift and did come with the vise. If I had to choose between the 2 for my sxs I...