was out for a ride sunday
staged at the yellow gates on the corbin road and road into the new cabin
was good for a first ride a couple feet in the rolling hills
didnt go to the wranglers cabin or the notch but a group we met was going there someone told them snow was good there but no...
due to the fact that cat wont upgrade the brg nobody is getting warranty on this so its not showing up as a problem maybe we should be getting it fixed under warranty and then redo it ourselves at least then they would have a record of all the bearing problems
maybe we are just shooting...
the point of reporting this isnt to have a law suit or anything other than the fact that yes the bearings are failing in prob 99% of the DDs but cat just wont do anything about it so if it is reported as a possible safety hazard they will be forced to do something about it instead of the...
anyone ever try methanol and water
Do It Yourself Water Alcohol Methanol Injection
they used to use this on mustang fighter planes in the war
not in my sled but sure like to know if it works for turbo sleds
I dont think the weight will be a big isue the front and back should take most of the weight not the sides
how many guys just put their sled in the back lift it up and close the endgate
prob 80% othe the weight is on the tailgate and it seems to be fine
I wouldnt be woried at all
just finished helping a buddy do his on a 05 wasnt to bad as he did all the work and I just supervised
he used a 3/8 drive plug socket short extension and a swivel they all have to be put together as the go into the plug holes and then taken apart on the way out on some of the plugs as...
there may also be an engine mount recall I know we had 1 that had a recall on it
these motors seem to have a bad vibration at idle so I think you need to be wot most of the time
before you go anywhere with a m1000 make sure you reinforce the tunnel where the steering post attaches they all seem to crack there and the front cooler is part of the tunnel so if you weld the crack make sure you don't melt through the cooler there is an aftermarket bracket that you can use...