Search results

I always used ufa never a problem and aways cheaper the the service station. Plus you well be able to charge stuff at the farm supply to.

Re: Cahmpion generators I don't have one but have heard them(very loud)

I have a set of 4 15" tires and rims. Do you know the spacing/how many lugs?

I hope so it. The engine is out of a 85 and has ported and polished heads, flat top pistons, intake, 770 carb, cam, and headers. Hoping it well be at least 400hp but time well tell. The only bad thing about this one is the diff 3 to 1 ratio and open but I have a 3.50 to 1 limited slip in the...

Thats a good question the only place its been is drove on to a trailer and off so I don't know yet. I do have a little gear box that goes in line with the cable should be able to get different gears. My insurance company won't put liability on it until I get a inspection so I won't know until I...

Thanks for the replies I fixed some lights and checked everything over still need to replace signal light switch($175 from ford) and a tie rod end. Going to try to get the inspection done next week when the switch comes in. Here's what I am working on its going to replace the long box that was...

Just wondering if anyone ever had one done and if so did they stick you on anything. What are the main things I should look for? other then lights, horn, tires, and steering parts. Thanks

BRUTE FORCE SERVICE MANUAL

Heres a pic of mine and the wifes from last year

It's a 79 but it had some bad luck last year when the shed I had it stored in fell in you can see the front of the truck in the second pic beside the camper. I have bought a 78 to replace it as the 79 was wrote off. The 78 is currently being shipped from the states(its the last pic).

Ya we looked at the toyhaulers too just didn't like the lay outs and the fact that most of them have living quarters in the hauling part. We are thinking of building a house and living in the trailer for a few months until the house is done so we went with a straight fifth wheel now I pull that...

Heres a pic of by camper and belly bar I made the belly bar out of 2" square tube welded chains to the end. I mounted it to the frame using L brackets bolted through holes that were in the frame. Then I bolted the square tube to the L brackets. I never did tie down the back of the camper but I...

I heard about a couple of bad fuel issues with the perto can cardlock in whitecourt maybe one place to stay away from. I have always used UFA cardlock all over alberta and never had a problem. I also use esso service station in G.P. for the work truck never a issue.

I have a ole's riser on by polaris and it's great. I don't think they have any retailers though

I've run a edge ez on my dodge and liked it I now have a x-power from BD it's a little slower to come on but when it does it pulls hard. I just got a new one after the one one developed a problem and have to say that BD's service is the best I ever had hands down. They also upgraded me the the...

Gaudins in beverlodge has been good to me but I only buy parts.

I agree with sledderglen. I run a completely gutted box with four extra flow rites in the hood.

I have a 2001 800 non ves bottom end with 03 ves cylinders on top works great but I also am running a ves pipe and cdi box. Any questions?

Hi I am looking at buying a truck from the states but I don't have the time to go down and pick it up myself or I would. I got a quote from soutern auto transport just wondering if anyone has ever used them or any other transporter. Also found this company not sure about them but the make it...

I put laminate flooring in a truck camper and it worked out good just hard to fined trim for the edges that matched and the laminate is quite a bit thicker. So yes it can be done. It stood up farly well.