when you say "lower airbox", are you talking the piece that slides out right by your carbs, or the big one closer to the front with the spring action valve in it? Thanks.
So here is the updated information from the station on Belle Mountain. It shows that we are slowly getting above the "Minimum" recorded level.... but still no where near average yet. Here is the web address:
The chevy they put it against had a 3.42 gear ratio. No wonder the Ford beat it so bad. I had a work truck with a 3.42 gear ratio, and it was an absolute dog. Not quite a fair competition IMO.....
He has the Hillclimb edition maybe? They were wider stance than the normal ones. Any dealer or aftermarket place should be able to get all parts needed.
They were just serviced. I had a DJ Clutch Kit put in this summer, and at the same time we found a broken secondary roller, and the plastic primary bushing was replaced. I watched him specifically clean both the primary and secondary. This happened after the kit went in, but I haven't had a...
I might be totally wrong, but I noticed with my sled this year, that the first 2 times I started it to move it around and put it on the trailer, the clutches didn't want to release the belt after idling down, even though the deflection was set right. The belt had some "shape memory" from...
I put most of the things everyone has said, but I also added a wireless key/tether system similar to Teth-Air, Underhood compartment for goggles and gloves to dry off while sledding, and stock vent screens so snow doesn't pile up in front of the pipe,
I am curious whether people are installing the cigarette lighter on the dash (Ski-doo XP), and plugging into that, or if they are hard wiring the unit under the hood. I would think that if you use the cigarette lighter on the dash, it might get snow in it and short out, when in deep powder. I...
Rotaxrider, please refer to the following thread that explains the trail fees, and why they went up this year. https://www.snowandmud.com/forum/f3/trail-user-fees-37039.html You can blame the government for not providing any funding this year, which has forced McBride to up their fees a little...
I had Kerry @ Over The Top supply and install my DJ clutch kit, as it was cheaper than buying the necessary tools, and I hadn't played with the QRS secondary before Knowledgeable guy, great rates, and no need to go into the nut-house city....