Search results

I'd agree with Vipertonytro, 600 vs 700 similar weight. The SRX was a better motor but not a lot of them around, it's getting hard to find parts. I came close to going SRX but went Apex instead. The 700 Mtn maxes were made forever so lots of used/new parts and very reliable. They are heavier...

bravos are a good step up from a 120. Both my girls are on them and they both started on 120s.

BB I thought you were sellin that sapex? If you have not lowered the compression then you need race, or higher octane. I'm only running 8psi and blend avgas with pump gas. If your motor is stock and your running 11psi your going to need minimum 98 octane (good to as low as 3500ft). If the...

Well if the county maintains the road to the Provincial Park (Chinook Lake) for the cross-country skiers then I would hope they would extend the same courtesy to the sledders and at least plow to the parking lot. Atlas sees a lot more use than the PP in the winter. I cannot see loosing...

I've done it a few times and the salt is hard on door hinges and locks. Make sure you wash the trailer outside thoroughly after camping. We camped to -17C @ Atlas. We ran a generator all night to power a 1500W base board heater, otherwise the furnace was coming on steady. This is in a 3...

I run silent armors, winter rated and good to run year round. I've only got 32k on them so far but I like them. Two sets of tires is a pain.

A buddy of mine is thinking of buying a house in the Crowsnest and is looking for tips but does not no anyone down that way. He's looking for a 3 bedroom house anywhere between Bellevue and Coleman. Are there any neighborhoods to steer clear of? Bad water, areas prone to basement floods...

I had the bottom 1/4 panels of my truck done in white line-x. Had it done 2 years ago and no problems.

I've just drilled the holes up front (under the bumper) and covered with frog skin and then pet screen (to protect the frog skin from branches - that stuff is expensive). And I have also covered the grey vents in the side panels with pet screen. That has helped them stay clear of snow. Those...

You cannot do it....or don't want to try (it's not a ski-doo), I get that. Others can and do every time the sled comes of the deck. Mines stock except for the supercharger. No throttle lag, and it will go places in the trees a stocker will not touch. I'll listen to you talk about doos all...

I'd hazard a guess that 80% have not ridden one. Ya, I'm bagged at the end of a day...but I'd be bagged if I was riding a Bravo as well. I've always thought if your not bagged at the end of the day, your not riding hard enough and it's the rider that makes any sled point and shoot. I can...

That'd be great, there's probably a few other things I could use.

Always looking for A-arms, if your getting rid of some and they are straight and either blue or black I'm interested. Might also be interested in body panels and a few other misc. items. Sounds lie your putting together a nypex?

Snowmobiling is the only motorized sport me or my family do. Other winter activities I do: speed skating, x country skiing, downhill skiing (all with my kids). Summer stuff: Mtb biking, hiking, windsurfing, and a bit o' fishing now and then.

MPI makes an oil tank as part of their super charger kits for the Apex. Although I have just cracked the lower mounting flange off of my MPI tank. I've got over 7k on my apex and close to 2k with the charger on. But I think the flange crack is from throwing my sled on it's side and the...

I'd have to either grind weight of the tip of my Daltons or get new weights. This is one of the down sides to the Dalton adjustable, you cannot select where the weight gets added. I think a dual angle helix will help by providing more sensitivity to track torque on the top end. I'm not sure...

Sorry Barry, I know you posted the same question on my "Visitor Page", I just have not been able to get to it. I've seen the same sort of issue on mine. I thought it might be my tunnel loading up with snow as the clearance between the front cooler and the paddles on my 2.5" CE track is about...

Thanks for the tip!

Bummer! Thanks!

Cycle Works bought Seitzco?!