Search results

The tunnel on the gen 2 is wider than the iq skid. Gen 2 is 16.25 inches and iq skid is 15.75. I had to build some spacers, make new cross shafts and move the mounting plates on tunnel after a lot of measuring and figuring out best mounting location that would not screw up the handling. Good...

check with your insurance broker, i insured my katana 750 without a class 6. costs a little more but there is a company that will insure without a license.

yes. the battery needs to be in good shape or it will not run or start sometimes.

Well i agree with thunder44, if you have a problem with garbage at the cabin then start a new thread with your concerns. I dont go to a thread called kakwa conditions to hear about garbage at the cabin. It's called thread hijacking and this discussion is more of the same!!!:mad:

the throttle safety is probably already bypassed, you would hook together the wires from the wiring harness. yes the headlight would/could work if there is no spark, two different sides of stator one for lighting one for ignition. hooking wires together from stator is not a good idea, call your...

My thoughts are it could be your stator plate. Or what happened to mine was the magnets in the carbs or the pickup for the magnet fails and the throttle safety engages and kills the engine. you can bypass easily by unplugging wire from carbs and connecting them together.

I just put a set of bridgestone blizzaks 265/75/16 on my duramax and they are great. They don't throw rocks on gravel and i haven't had to put in in 4x4 since i put them on.

What facts does he need to get straight? He seen a guy in a black dodge driving like a jerk with a plate #. Either it was your plate or it wasn't, if it wasn't then say so. Who cares if the letters were first or they were after the numbers. I used to have a BC plate on my truck and it was in the...

I heard that as well, lots of camps and people but not very many trail passes, WTF? I'm wondering is there a fee for a camp permit? if so how much? Thanks

Yep got the clutch! It's in really good shape i'm happy:d Must be low miles on it. Thank you!! How many rpm were you gettin with 65gram weights? I have been running 62g.

Here is a post from snowest from a guy who did it, IQ seat on a Gen II - SnoWest Forum This is the seat i will probably be gettin this year BOSS Polaris Edge Seats First Place Parts

I don't know if they will fit but you can have them if you want!! What a great way to get rid of parts you don't need anymore!!:d:d

heavy d said to pay it forward so here goes, stock can off a 03 rmk 700 edge. 136 extra lite rails and rear scissor, basically what's left of my old skid, i broke the front arm. also have a hand transfer pump for a slip tank i haven't used forever for the taking!! thanks heavy d :d

Yes got some 3/4 aluminum bar from steel ind, drilled and tapped the ends for new cross shafts, also got some collars with set screws and ground them down for spacers. i used my stock drivers as both are 2.52 pitch. new skid def rides better and is stronger!!

the biggest problem is the fact the iq skid is 15.75 wide and the gen 2 tunnel is 16.25. i put a iq 151 skid in my gen 2 and had to make new shafts and fab up some spacers. you also have to move the mounting plates in the tunnel as it does not bolt right up. can be done, just takes some time!!

I agree, licence plate lights not working at night is also good excuse to pull you over!!

I got some lines made up here Home Check yellow pages in regina under "hose" and see who does industrial hoses. I would take them off and go in and they can make exactly what you need.:beer:

I agree!!

I have heard of the no receiver without trailer but i believe the law allows 2 feet of overhang past taillights, any more and you need to have it flagged.

I have run the coop synthetic with no problems, I now run the coop TC-W3 dynamix plus, regular dino oil in my sled and dirt bike, good oil and good price.:beer: