I haven't seen much on the subject of belts & what brands others use. Or the impression users have for different brand belts.
So, I want to ask everyone, "What Brand Belt Do You Use ?"
I ride a 2003 660 Yamaha Grizzly. My Yamaha snowmobiling buddies, tell me to run only Yamaha factory belts. But here's my issue.
Some time back, I think last summer, I had about 1500 miles on the machine & decided to clean & inspect the clutch. I also installed a Dalton clutch kit at this time.
So I break out the service manual & read the spec's on belt wear & limits.
My belt was within 0.08 of needing replacement by what I read in the service manual. So I & two of my riding buddies, ordered a NEW Yahama Factory belt.
When the three belts arrived, we measured the width of each belt, expecting them to be the width the service manual stated a new belt should be.
DAMN .... not one of the three belts measured what the service manual stated they should ... AND .... all three belts measured a slightly different width.
Needless to say, I for one, was not happy.
On another forum, I read where a Kawi rider raved about his Dayco belt & it got me to think'in .....
1) What brand belt are others using ??
2) Are you pleased with that brand of belt ??
3) Did you measure the width against what the service manual states a new belt width should be ?? How close was the measurement, if not to spec width ?
4) What brands belts have you tried ? What are your impressions of each of those brands ??
I want to thank all who reply to this thread & pass along their impressions of "What is a good Belt" .....
Thanks ...
Later ....
So, I want to ask everyone, "What Brand Belt Do You Use ?"
I ride a 2003 660 Yamaha Grizzly. My Yamaha snowmobiling buddies, tell me to run only Yamaha factory belts. But here's my issue.
Some time back, I think last summer, I had about 1500 miles on the machine & decided to clean & inspect the clutch. I also installed a Dalton clutch kit at this time.
So I break out the service manual & read the spec's on belt wear & limits.
My belt was within 0.08 of needing replacement by what I read in the service manual. So I & two of my riding buddies, ordered a NEW Yahama Factory belt.
When the three belts arrived, we measured the width of each belt, expecting them to be the width the service manual stated a new belt should be.
DAMN .... not one of the three belts measured what the service manual stated they should ... AND .... all three belts measured a slightly different width.
Needless to say, I for one, was not happy.
On another forum, I read where a Kawi rider raved about his Dayco belt & it got me to think'in .....
1) What brand belt are others using ??
2) Are you pleased with that brand of belt ??
3) Did you measure the width against what the service manual states a new belt width should be ?? How close was the measurement, if not to spec width ?
4) What brands belts have you tried ? What are your impressions of each of those brands ??
I want to thank all who reply to this thread & pass along their impressions of "What is a good Belt" .....
Thanks ...
Later ....