What’s fits??

[catmando]

I got a 7’ x 12’ enclosed trailer, thinking about possibly buying a side x side but would like it too fit in my trailer. Is it doable? What which side x sides are narrow enough too make this work if there is a possibility.

 

[snopro]

I got a 7’ x 12’ enclosed trailer, thinking about possibly buying a side x side but would like it too fit in my trailer. Is it doable? What which side x sides are narrow enough too make this work if there is a possibility.

Maybe a JD Gator? CanAm Maverick Trail may be narrow enough as well?

 

[catmando]

Maybe a JD Gator? CanAm Maverick Trail may be narrow enough as well?

Think if I bought a gator I might lose my man card lol, will have too look into the can am trail

 

[vrscr43]

I can fit a Canam Defender XMR in my 7 x 14 and probably have at least a couple extra feet.
I had Martins drive it in the trailer before I paid for the SXS.
Its the height you have to watch for.
My XMR is around 82 " high and my door opening is 78.5" but it drives right in.
Doesn't sound right but it fits.
I believe its the angle coming in when you are on the ramp which helps.

 

[catmando]

I can fit a Canam Defender XMR in my 7 x 14 and probably have at least a couple extra feet.
I had Martins drive it in the trailer before I paid for the SXS.
Its the height you have to watch for.
My XMR is around 82 " high and my door opening is 78.5" but it drives right in.
Doesn't sound right but it fits.
I believe its the angle coming in when you are on the ramp which helps.

Will have too drive a couple in too see how much room I have before I start looking, not in a rush, just like too know what fits before I start looking, will have too check door height for sure, I know I got at least 6 ft

 

[moyiesledhead]

I've had both my RZR-s and my Commander in my 7x12. Any 60" machine should be fine.

 

[Cdnfireman]

I've had both my RZR-s and my Commander in my 7x12. Any 60" machine should be fine.

The machine fitting is one thing and getting in/out of the machine in the trailer is another. If it has doors on it opening them to get out can be a problem. Unless you just roll it in and out by hand....

 

[moyiesledhead]

The machine fitting is one thing and getting in/out of the machine in the trailer is another. If it has doors on it opening them to get out can be a problem. Unless you just roll it in and out by hand....

Have doors on both. Park tight to the opposite wall, no problem. And I'm not what you'd call a thin guy.

With tracks on was a different story. They fit, but getting out is a PITA. Use an open trailer for that.

 

[rightsideup]

Maybe a JD Gator? CanAm Maverick Trail may be narrow enough as well?

Polaris rzr 570 also cf moto makes the narrow ones

 

[catmando]

I will hopefully get a chance too load one or two different ones , good too have some input, last time I had a side by side I drove it on too a rack on the back of my 1 ton.

 

[neilsleder]

I would say a ranger would width. Mine fit in the box of my truck. But they’re pretty tall

 

[catmando]

I would say a ranger would width. Mine fit in the box of my truck. But they’re pretty tall

Yup I’m thinking I will be more concerned about height than width, thx

 

[Tchetek]

Yup I’m thinking I will be more concerned about height than width, thx

I have a rzr4 800 that is 60 inch wide and about 10 1/2 foot wheel base. With bumpers ect it’s pretty close to 12 feet.

You can come test fit mine to measure and compare what you have to work with.

 

[catmando]

I have a rzr4 800 that is 60 inch wide and about 10 1/2 foot wheel base. With bumpers ect it’s pretty close to 12 feet.

You can come test fit mine to measure and compare what you have to work with.

Thx I will keep that in mind.

 

[johnny cash]

My ranger height is 73 inches tall my door height is 78 inches width wise no problem on a 7 foot wide trailer

 

[TylerG]

I will hopefully get a chance too load one or two different ones , good too have some input, last time I had a side by side I drove it on too a rack on the back of my 1 ton.

just go try Ron's out he doesn't use it, you should!

 

[catmando]

just go try Ron's out he doesn't use it, you should!

That thing is 9 ft high , and 7 feet wide....

 

[TylerG]

That thing is 9 ft high , and 7 feet wide....

true.... good point..... although, it's not yours so you could load it in and out on the rotors.

 

[rhody605]

As has been posted above drive in tight to passenger side to leave room for door to open. I suggest e-track on floor then use a single tire ratchet strap on a rear tire.
My trailer is wider but i pack lots down the sides between walls and machine.

I have a Wildcat Limited 700 with aftermarket rims and it sits roughly 64" wide.