Tach not working 2003 RMK 800

cat ryder

New member
Joined
Jan 14, 2011
Messages
2
Reaction score
0
Location
Grande Prairie
I was wondering if anyone could help me out. My tach isn't working on my 2003 |RMK 800. (NOT SURE WHERE TO START TROUBLE SHOOTING)
 

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
what about all the other acc. warmers,lights etc. could be melted plug or some wires came unplugged going to the stator
 

GuitarMan69

Member
Joined
Nov 18, 2010
Messages
20
Reaction score
8
Location
Northern BC
If it is like my 2000, pull the driveshaft bearing housing(3 bolt) off just under the secondary, There is a square key in there that could be broken or the actual spedo peice is siezed, If thats not it undo the cable at you guage and try and turn the cable it could be broke somewere in ther.
Good luck
 

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
If it is like my 2000, pull the driveshaft bearing housing(3 bolt) off just under the secondary, There is a square key in there that could be broken or the actual spedo peice is siezed, If thats not it undo the cable at you guage and try and turn the cable it could be broke somewere in ther.
Good luck

???????????????????????thought it was his tach?:confused:
 

cat ryder

New member
Joined
Jan 14, 2011
Messages
2
Reaction score
0
Location
Grande Prairie
Thanks guys I will take a peek and see what I can find, My speedo and Odometer arent working either. I will check this fix out as well.
 
Top Bottom