Stock pin weight

[Turts]

Help!
I’ve a set of Dalton adjustable weights and need to know what stock pin weight on a 15 174.

 

[bayman]

Help!
I’ve a set of Dalton adjustable weights and need to know what stock pin weight on a 15 174.

can't tell you the stock weight, but I can tell you I ran empty Dalton pins on my 15 T3 174....14.5 grams

 

[Turts]

can't tell you the stock weight, but I can tell you I ran empty Dalton pins on my 15 T3 174....14.5 grams

Ok. So you are running empty pins for a stock calibration?

 

[mur190]

I believe empty doo pins are 12.3g, best thing also is to pick up a gram scale, also if you run after market rollers (even the same size as stock) they are typically heavier 1-1.5grams

 

[bayman]

I ran empty Dalton pins, which I believe are 14.5 gram, and a Dalton TAN/WHITE primary spring.

 

[vodoo103]

I believe empty doo pins are 12.3g, best thing also is to pick up a gram scale, also if you run after market rollers (even the same size as stock) they are typically heavier 1-1.5grams

I had bought one of these for that very reason & works really well.
https://www.amazon.ca/dp/B00EPO9M2Y/ref=sspa_dk_detail_2?psc=1

I have a set of stock pins from my 2015 T3-163 if you still are looking for weight on them. I know the gearing was different in the 174's, but not sure if they had different pins, springs, etc.

 

[Caper11]

Stock weight with setscrews is 14.5g

 

[Turts]

I had bought one of these for that very reason & works really well.
https://www.amazon.ca/dp/B00EPO9M2Y/ref=sspa_dk_detail_2?psc=1

I have a set of stock pins from my 2015 T3-163 if you still are looking for weight on them. I know the gearing was different in the 174's, but not sure if they had different pins, springs, etc.

If your don’t mind, huck em on a scale.
Sounds like 14.5g is what I should be aiming for.
Hopefully not less, this adjustable set starts at 14.5g.