Speedomoeter Not Working

[woody_tobius_jr]

I've been trying to figure out why my speedo/odomoeter isn't working on my '08 XP Everest. I have checked the 4 fuses by the battery, they are all good, I have checked the sensor connector, I have pulled the chaincase cover off and cleaned the sensor magnets, and I have checked the harness going into the gauge cluster. Everything seems fine. When I flash up the motor the speedo goes right around and comes back to 0, so I know I have power there. Any advice is appreciated

 

[p.summit]

I have the same problem with my 08 everest, it sometimes cuts in and out. When i start up the gauges go around then a when i start riding they don't move. I shut off and restarted and then it worked. Might be some kind of connection problem or thats how they all are..

 

[WildWestDooing]

Fuel gauge not proper reading, so replace dash or cluster. Now with new cluster kilometer set to 0. I has warranty cover for this. My friend has similar
problem.